|  | 
 
 
 楼主|
发表于 2022-9-22 10:38:20
|
显示全部楼层 
| 多谢大佬指点迷津,烧录模式的开关是指?只看到一个切换按钮,不按的话就是直接启动。。。
 
 刚才我通过短接spi flash的clk之后可以识别为MASKROM模式,并且下载也可以的。
 我下载的是官方的最新的:
 rockpi-4b-ubuntu-focal-server-arm64-20220801-0355-gpt.img
 和rockpi-4b-debian-buster-xfce4-arm64-20220801-0347-gpt.img
 这两个都会显示这个同样错误,loader也是最新的rk3399_loader_v1.20.119。
 
 下载rockpi4b-ubuntu-bionic-minimal-20191127_1942-gpt.img就可以正常启动。
 
 hw_conf.dts_overlay_count = 0
 1:      kernel-5.10.131-2-rockchip-g8802564cbf09
 Retrieving file: /initrd.img-5.10.131-2-rockchip-g8802564cbf09
 reading /initrd.img-5.10.131-2-rockchip-g8802564cbf09
 12522632 bytes read in 85 ms (140.5 MiB/s)
 Retrieving file: /vmlinuz-5.10.131-2-rockchip-g8802564cbf09
 reading /vmlinuz-5.10.131-2-rockchip-g8802564cbf09
 28903936 bytes read in 177 ms (155.7 MiB/s)
 append: earlyprintk console=ttyFIQ0,1500000n8 rw init=/sbin/init rootfstype=ext4 rootwait  root=UUID=4ceb5527-58bb-459e-973b-c8bbb1dcfc2e console=ttyS2,1500000n8
 Retrieving file: /dtbs/5.10.131-2-rockchip-g8802564cbf09/rockchip/rockpi-4b-linux.dtb
 ** Unable to read file /dtbs/5.10.131-2-rockchip-g8802564cbf09/rockchip/rockpi-4b-linux.dtb **
 Skipping kernel-5.10.131-2-rockchip-g8802564cbf09 for failure retrieving fdt
 SCRIPT FAILED: continuing...
 starting USB...
 USB0:   USB EHCI 1.00
 USB1:   USB OHCI 1.0
 USB2:   failed to get usb phy
 Port not available.
 USB3:   failed to get usb phy
 Port not available.
 USB4:   Can't get the usbphy register address
 probe failed, error -6
 USB5:   Can't get the usbphy register address
 probe failed, error -6
 scanning bus 0 for devices... 1 USB Device(s) found
 scanning bus 1 for devices... 1 USB Device(s) found
 scanning usb for storage devices... 0 Storage Device(s) found
 
 Device 0: unknown device
 ethernet@fe300000 Waiting for PHY auto negotiation to complete...
 | 
 |