Welcome to minicom 2.8

OPTIONS: I18n                                                                
Port /dev/ttyUSB0, 15:03:36                                                  
                                                                             
Press CTRL-A Z for help on special keys                                      
                                                                                                                   
DDR d5483af87d cym 23/11/23-16:15:24,fwver: v1.15                                                                  
LPDDR4X, 2112MHz                                                                                                   
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB                                                 
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB                                                 
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB           
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB           
Manufacturer ID:0xff                                                         
CH0 RX Vref:27.9%, TX Vref:21.8%,0.0%                                        
CH1 RX Vref:28.5%, TX Vref:21.8%,0.0%                                        
CH2 RX Vref:27.9%, TX Vref:20.8%,0.0%                                        
CH3 RX Vref:27.9%, TX Vref:19.8%,0.0%                                        
change to F1: 528MHz                                                         
change to F2: 1068MHz                                                        
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-ge4e124926e-230922 #lxh (Sep 25 2023 - 10:58:38), fwver: v1.13
unknown raw ID 0 0 0
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(2e8446f969...) + OK
## Checking uboot 0x00200000 ... sha256(d2c47185e0...) + OK
## Checking fdt 0x003691c8 ... sha256(a434b1c4fe...) + OK
## Checking atf-2 0xff100000 ... sha256(9f75e6ec37...) + OK
## Checking atf-3 0x000f0000 ... sha256(c80587de50...) + OK
## Checking optee 0x08400000 ... sha256(4b2d406bfc...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 279.88/477.373 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-662-g4acbe711b-dirty:finley.xiao, fwver: v1.44
NOTICE:  BL31: Built : 16:44:24, Nov  7 2023
INFO:    spec: 0x13
INFO:    code: 0x88
INFO:    ext 32k is not valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    l3 cache partition cfg-0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
I/TC: 
I/TC: OP-TEE version: 3.13.0-752-g62aa10b78 #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Mon Sep 25 10:04:34 CST 2023 aarch64, fwv 
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09(u-boot commit id: f83f9138f5)(sdk version: manifest)-gf83f9138f5-231011 #qiao (Oct 29 2024 - 20:14:47 +0800)

Model: Rockchip RK3588 Evaluation Board
MPIDR: 0x81000000
PreSerial: 2, raw, 0xfeb50000
DRAM:  8 GiB
Sysmem: init
Relocation Offset: ed9f4000
Relocation fdt: eb7f9ea0 - eb7fecd8
CR: M/C/I
Using default environment

optee api revision: 2.0
no mmc device at slot 1
mmc@fe2c0000: 1 (SD), mmc@fe2e0000: 0
Bootdev(atags): mmc 1
MMC1: Legacy, 52Mhz
PartType: EFI
TEEC: Waring: Could not find security partition
DM: v2
extboot part -> 3
=================begin===================
245526 bytes read in 39 ms (6 MiB/s)
DTB(Distro): rk-kernel.dtb
boot mode: recovery (misc)
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c2 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x40, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Firefly fixed_regulator_set_enable: dev='vcc3v3-lcd0-n', enable=1, delay=0, has_gpio=1
Device 'gpio@fd8a0000': seq 0 is in use by 'gpio@fd8a0000'
Device 'gpio@fec30000': seq 2 is in use by 'gpio@fd8a0000'
serdes_power_init failed to get serdes misc device
Warn: can't find connect driver
Warn: can't get connect driver
Warn: can't find connect driver
Warn: can't get connect driver
Model: Rockchip RK3588S EVB4 LP4X V10 Board
MPIDR: 0x81000000
Minidump: init...
CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  b0pll 24000 KHz
  b1pll 24000 KHz
  lpll 24000 KHz
  v0pll 24000 KHz
  aupll 786431 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 1100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 750000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   Device 'gpio@fec40000': seq 3 is in use by 'gpio@fec30000'
eth1: ethernet@fe1c0000
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "recovery"
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0xe855e480 with size 0x0309aa00
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at e855e480 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0xe859ac80
     Data Size:    42418688 Bytes = 40.5 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00400000
     Entry Point:  0x00400000
     Hash algo:    sha256
     Hash value:   1a6af5b1bf0ec651ef2bd254d5995bf83529a8d94eb5403f2c9b2b89b72976ae
   Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at e855e480 ...
   Using 'conf' configuration
   Trying 'ramdisk' ramdisk subimage
     Description:  unavailable
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0xeae0ee80
     Data Size:    8298099 Bytes = 7.9 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x0a200000
     Entry Point:  unavailable
     Hash algo:    sha256
     Hash value:   d6ad2e3fe343989efdd87fc75031143b2a39d9797ba645d5227f04441740a5d6
   Verifying Hash Integrity ... sha256+ OK
   Loading ramdisk from 0xeae0ee80 to 0x0a200000
## Loading fdt from FIT Image at e855e480 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0xe855ec80
     Data Size:    245526 Bytes = 239.8 KiB
     Architecture: AArch64
     Load Address: 0x08300000
     Hash algo:    sha256
     Hash value:   187f46879fe3e784056abf62ec59b718a8c455f10905a6a0c1a304aefb2308f8
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x08300000 to 0x08300000
   Booting using the fdt blob at 0x08300000
   Loading Kernel Image from 0xe859ac80 to 0x00400000 ... OK
   kernel loaded at 0x00400000, end = 0x02c74200
   Using Device Tree in place at 0000000008300000, end 000000000833ef15
WARNING: could not set reg FDT_ERR_BADOFFSET.
## reserved-memory:
  ramoops@110000: addr=110000 size=e0000
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Adding bank: 0x2f0000000 - 0x300000000 (size: 0x10000000)
Total: 4930.576/5495.841 ms

Starting kernel ...

[    5.500986] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    5.501009] Linux version 5.10.198 (qiao@qiao.gainstrong.cn) (HEAD: ce58f5e1c213/2410292033) (sdk version: manifest.xml) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-4
[    5.504155] random: crng init done
[    5.511209] Machine model: Rockchip RK3588S EVB4 LP4X V10 Board
[    5.541670] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    5.546672] printk: bootconsole [uart8250] enabled
[    5.549268] efi: UEFI not found.
[    5.554609] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    5.555675] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    5.556917] Reserved memory: created CMA memory pool at 0x00000002ff800000, size 8 MiB
[    5.557642] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    5.676799] Zone ranges:
[    5.677043]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    5.677615]   DMA32    empty
[    5.677882]   Normal   [mem 0x0000000100000000-0x00000002ffffffff]
[    5.678451] Movable zone start for each node
[    5.678843] Early memory node ranges
[    5.679172]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    5.679748]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    5.680324]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    5.680899]   node   0: [mem 0x00000002f0000000-0x00000002ffffffff]
[    5.681475] Initmem setup node 0 [mem 0x0000000000200000-0x00000002ffffffff]
[    5.730729] psci: probing for conduit method from DT.
[    5.731200] psci: PSCIv1.1 detected in firmware.
[    5.731624] psci: Using standard PSCI v0.2 function IDs
[    5.732105] psci: Trusted OS migration not required
[    5.732555] psci: SMC Calling Convention v1.2
[    5.733340] percpu: Embedded 32 pages/cpu s93736 r8192 d29144 u131072
[    5.734094] Detected VIPT I-cache on CPU0
[    5.734497] CPU features: detected: GIC system register CPU interface
[    5.735088] CPU features: detected: Virtualization Host Extensions
[    5.735658] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    5.736345] alternatives: patching kernel code
[    5.738635] Built 1 zonelists, mobility grouping on.  Total pages: 2059848
[    5.739271] Kernel command line: storagemedia=sd androidboot.storagemedia=sd androidboot.mode=normal  storagenode=/mmc@fe2c0000 androidboot.verifiedbootstate=orange ro rootwait earlycon=uart8250,mmio3t
[    5.745003] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    5.746123] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    5.746843] mem auto-init: stack:off, heap alloc:off, heap free:off
[    5.753689] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
[    5.812062] Memory: 8083652K/8370176K available (21632K kernel code, 4112K rwdata, 7744K rodata, 7808K init, 708K bss, 278332K reserved, 8192K cma-reserved)
[    5.813455] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    5.814084] ftrace: allocating 68173 entries in 267 pages
[    5.908224] ftrace: allocated 267 pages with 4 groups
[    5.908929] rcu: Hierarchical RCU implementation.
[    5.909364] rcu:     RCU event tracing is enabled.
[    5.909780] rcu:     RCU dyntick-idle grace-period acceleration is enabled.
[    5.910394]  All grace periods are expedited (rcu_expedited).
[    5.910920]  Rude variant of Tasks RCU enabled.
[    5.911334]  Tracing variant of Tasks RCU enabled.
[    5.911774] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    5.917220] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    5.920179] GICv3: GIC: Using split EOI/Deactivate mode
[    5.920662] GICv3: 480 SPIs implemented
[    5.921014] GICv3: 0 Extended SPIs implemented
[    5.921444] GICv3: Distributor has no Range Selector support
[    5.921968] GICv3: 16 PPIs implemented
[    5.922354] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    5.923078] ITS [mem 0xfe640000-0xfe65ffff]
[    5.923511] ITS@0x00000000fe640000: allocated 8192 Devices @100220000 (indirect, esz 8, psz 64K, shr 0)
[    5.924391] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100230000 (flat, esz 2, psz 64K, shr 0)
[    5.925341] ITS: using cache flushing for cmd queue
[    5.925815] ITS [mem 0xfe660000-0xfe67ffff]
[    5.926239] ITS@0x00000000fe660000: allocated 8192 Devices @100250000 (indirect, esz 8, psz 64K, shr 0)
[    5.927118] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100260000 (flat, esz 2, psz 64K, shr 0)
[    5.928067] ITS: using cache flushing for cmd queue
[    5.928700] GICv3: using LPI property table @0x0000000100270000
[    5.929356] GIC: using cache flushing for LPI property table
[    5.929881] GICv3: CPU0: using allocated LPI pending table @0x0000000100280000
[    5.930586] rcu:     Offload RCU callbacks from CPUs: 0-7.
[    6.042022] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    6.042568] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    6.043524] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    6.045367] Console: colour dummy device 80x25
[    6.045789] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    6.046703] pid_max: default: 32768 minimum: 301
[    6.047191] LSM: Security Framework initializing
[    6.047656] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    6.048342] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    6.050593] rcu: Hierarchical SRCU implementation.
[    6.051868] Platform MSI: msi-controller@fe640000 domain created
[    6.052432] Platform MSI: msi-controller@fe660000 domain created
[    6.053289] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    6.054034] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    6.054922] EFI services will not be available.
[    6.055590] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    6.057208] Detected VIPT I-cache on CPU1
[    6.057233] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    6.057249] GICv3: CPU1: using allocated LPI pending table @0x0000000100290000
[    6.057289] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    6.058559] Detected VIPT I-cache on CPU2
[    6.058580] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    6.058595] GICv3: CPU2: using allocated LPI pending table @0x00000001002a0000
[    6.058633] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    6.059882] Detected VIPT I-cache on CPU3
[    6.059900] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    6.059915] GICv3: CPU3: using allocated LPI pending table @0x00000001002b0000
[    6.059950] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    6.061224] CPU features: detected: Spectre-v4
[    6.061226] CPU features: detected: Spectre-BHB
[    6.061229] Detected PIPT I-cache on CPU4
[    6.061240] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    6.061248] GICv3: CPU4: using allocated LPI pending table @0x00000001002c0000
[    6.061270] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    6.062463] Detected PIPT I-cache on CPU5
[    6.062475] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    6.062483] GICv3: CPU5: using allocated LPI pending table @0x00000001002d0000
[    6.062506] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    6.063702] Detected PIPT I-cache on CPU6
[    6.063713] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    6.063722] GICv3: CPU6: using allocated LPI pending table @0x00000001002e0000
[    6.063744] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    6.064952] Detected PIPT I-cache on CPU7
[    6.064964] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    6.064972] GICv3: CPU7: using allocated LPI pending table @0x00000001002f0000
[    6.064995] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    6.065052] smp: Brought up 1 node, 8 CPUs
[    6.081547] SMP: Total of 8 processors activated.
[    6.081966] CPU features: detected: Privileged Access Never
[    6.082460] CPU features: detected: LSE atomic instructions
[    6.082956] CPU features: detected: User Access Override
[    6.083426] CPU features: detected: 32-bit EL0 Support
[    6.083883] CPU features: detected: Common not Private translations
[    6.084444] CPU features: detected: RAS Extension Support
[    6.084923] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    6.085682] CPU features: detected: CRC32 instructions
[    6.086137] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    6.086755] CPU features: detected: RCpc load-acquire (LDAPR)
[    6.110892] CPU: All CPU(s) started at EL2
[    6.113623] devtmpfs: initialized
[    6.123613] Registered cp15_barrier emulation handler
[    6.124066] Registered setend emulation handler
[    6.124529] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    6.125400] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    6.126114] pinctrl core: initialized pinctrl subsystem
[    6.126747] DMI not present or invalid.
[    6.127178] NET: Registered protocol family 16
[    6.128042] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    6.128721] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    6.129429] audit: initializing netlink subsys (disabled)
[    6.129959] audit: type=2000 audit(0.083:1): state=initialized audit_enabled=0 res=1
[    6.130371] Registered FIQ tty driver
[    6.131068] thermal_sys: Registered thermal governor 'fair_share'
[    6.131070] thermal_sys: Registered thermal governor 'step_wise'
[    6.131607] thermal_sys: Registered thermal governor 'user_space'
[    6.132139] thermal_sys: Registered thermal governor 'power_allocator'
[    6.132800] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    6.134101] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    6.134824] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    6.135547] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    6.136269] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    6.136992] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    6.137716] cpuidle: using governor menu
[    6.138176] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    6.138868] ASID allocator initialised with 65536 entries
[    6.140522] ramoops: dmesg-0 0x18000@0x0000000000110000
[    6.140986] ramoops: dmesg-1 0x18000@0x0000000000128000
[    6.141454] ramoops: console 0x80000@0x0000000000140000
[    6.141918] ramoops: pmsg    0x30000@0x00000000001c0000
[    6.142593] printk: console [ramoops-1] enabled
[    6.143001] pstore: Registered ramoops as persistent store backend
[    6.143543] ramoops: using 0xe0000@0x110000, ecc: 0
[    6.180114] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    6.180873] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    6.181581] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    6.182314] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    6.183060] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    6.183668] rockchip-pinctrl pinctrl: probed pinctrl
[    6.190440] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    6.191035] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    6.191624] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    6.192215] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    6.251420] raid6: neonx8   gen()  5597 MB/s
[    6.308142] raid6: neonx8   xor()  4425 MB/s
[    6.364866] raid6: neonx4   gen()  5530 MB/s
[    6.421589] raid6: neonx4   xor()  4526 MB/s
[    6.478314] raid6: neonx2   gen()  5280 MB/s
[    6.535034] raid6: neonx2   xor()  4258 MB/s
[    6.591758] raid6: neonx1   gen()  4352 MB/s
[    6.648480] raid6: neonx1   xor()  3568 MB/s
[    6.705209] raid6: int64x8  gen()  2615 MB/s
[    6.761931] raid6: int64x8  xor()  1549 MB/s
[    6.818657] raid6: int64x4  gen()  2924 MB/s
[    6.875377] raid6: int64x4  xor()  1554 MB/s
[    6.932097] raid6: int64x2  gen()  2498 MB/s
[    6.988824] raid6: int64x2  xor()  1347 MB/s
[    7.045544] raid6: int64x1  gen()  2050 MB/s
[    7.102268] raid6: int64x1  xor()  1077 MB/s
[    7.102643] raid6: using algorithm neonx8 gen() 5597 MB/s
[    7.103121] raid6: .... xor() 4425 MB/s, rmw enabled
[    7.103560] raid6: using neon recovery algorithm
[    7.104017] Lontium LT9211C driver installing....
[    7.104942] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    7.105431] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    7.105942] fiq_debugger_probe: could not install nmi irq handler
[[    7.106516] printk: console [ttyFIQ0] enabled
    7.106516] printk: console [ttyFIQ0] enabled
[    7.107286] printk: bootconsole [uart8250] disabled
[    7.107286] printk: bootconsole [uart8250] disabled
[    7.107769] Registered fiq debugger ttyFIQ0
[    7.108025] vcc5v0_sys: supplied by vcc12v_dcin
[    7.108106] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    7.108182] vcc5v0_usb: supplied by vcc5v0_usbdcin
[    7.108339] vbus5v0_typec: supplied by vcc5v0_usb
[    7.108422] vcc3v3_pcie20: supplied by vcc12v_dcin
[    7.108497] vcc5v0_host: supplied by vcc5v0_usb
[    7.108583] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    7.108844] iommu: Default domain type: Passthrough 
[    7.111513] rk_iommu fdcb7f00.iommu: can't request region for resource [mem 0xfdcb7f00-0xfdcb7fff]
[    7.111544] rk_iommu: probe of fdcb7f00.iommu failed with error -16
[    7.111923] usbcore: registered new interface driver usbfs
[    7.111935] usbcore: registered new interface driver hub
[    7.111947] usbcore: registered new device driver usb
[    7.111975] mc: Linux media interface: v0.10
[    7.111984] videodev: Linux video capture interface: v2.00
[    7.112006] pps_core: LinuxPPS API ver. 1 registered
[    7.112009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    7.112014] PTP clock support registered
[    7.112028] EDAC MC: Ver: 3.0.0
[    7.112302] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    7.112330] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    7.113236] Advanced Linux Sound Architecture Driver Initialized.
[    7.113387] Bluetooth: Core ver 2.22
[    7.113398] NET: Registered protocol family 31
[    7.113401] Bluetooth: HCI device and connection manager initialized
[    7.113405] Bluetooth: HCI socket layer initialized
[    7.113409] Bluetooth: L2CAP socket layer initialized
[    7.113415] Bluetooth: SCO socket layer initialized
[    7.114654] rockchip-cpuinfo cpuinfo: SoC            : 35881000
[    7.114659] rockchip-cpuinfo cpuinfo: Serial         : 581357a31d68f4aa
[    7.114918] clocksource: Switched to clocksource arch_sys_counter
[    7.375956] NET: Registered protocol family 2
[    7.376061] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    7.377968] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    7.378056] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    7.378398] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    7.379174] TCP: Hash tables configured (established 65536 bind 65536)
[    7.379220] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    7.379363] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    7.379550] NET: Registered protocol family 1
[    7.379706] RPC: Registered named UNIX socket transport module.
[    7.379709] RPC: Registered udp transport module.
[    7.379712] RPC: Registered tcp transport module.
[    7.379715] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.380036] PCI: CLS 0 bytes, default 64
[    7.380300] Trying to unpack rootfs image as initramfs...
[    7.586939] Freeing initrd memory: 8100K
[    7.587544] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    7.588041] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    7.588713] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    7.589222] kvm [1]: IPA Size Limit: 40 bits
[    7.589233] kvm [1]: GICv3: no GICV resource entry
[    7.589236] kvm [1]: disabling GICv2 emulation
[    7.589248] kvm [1]: GIC system register CPU interface enabled
[    7.589355] kvm [1]: vgic interrupt IRQ9
[    7.589496] kvm [1]: VHE mode initialized successfully
[    7.591388] Initialise system trusted keyrings
[    7.591439] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    7.593100] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    7.593328] NFS: Registering the id_resolver key type
[    7.593336] Key type id_resolver registered
[    7.593339] Key type id_legacy registered
[    7.593345] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    7.593788] Key type cifs.spnego registered
[    7.593794] Key type cifs.idmap registered
[    7.593799] ntfs: driver 2.1.32 [Flags: R/O].
[    7.593843] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    7.593916] fuse: init (API version 7.32)
[    7.594041] SGI XFS with security attributes, no debug enabled
[    7.614916] NET: Registered protocol family 38
[    7.614923] xor: measuring software checksum speed
[    7.616340]    8regs           :  6982 MB/sec
[    7.617519]    32regs          :  8371 MB/sec
[    7.618378]    arm64_neon      : 11715 MB/sec
[    7.618382] xor: using function: arm64_neon (11715 MB/sec)
[    7.618393] Key type asymmetric registered
[    7.618397] Asymmetric key parser 'x509' registered
[    7.618411] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    7.618468] io scheduler mq-deadline registered
[    7.618473] io scheduler kyber registered
[    7.618905] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
[    7.618966] rockchip-csi2-dphy-hw fedc8000.csi2-dphy1-hw: csi2 dphy hw probe successfully!
[    7.624399] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    7.625343] Firefly gpio driver init!
[    7.625422] Firefly gpio driver register return : 0 
[    7.625496] Firefly detect position driver init!
[    7.625571] Firefly detect position driver register return : 0 
[    7.626684] rk-pcie fe180000.pcie: invalid prsnt-gpios property in node
[    7.626890] rk-pcie fe190000.pcie: invalid prsnt-gpios property in node
[    7.627113] pwm-backlight backlight: supply power not found, using dummy regulator
[    7.627261] pwm-backlight backlight1: supply power not found, using dummy regulator
[    7.627310] rk-pcie fe180000.pcie: IRQ msi not found
[    7.627321] rk-pcie fe180000.pcie: use outband MSI support
[    7.627330] rk-pcie fe180000.pcie: Missing *config* reg space
[    7.627349] rk-pcie fe180000.pcie: host bridge /pcie@fe180000 ranges:
[    7.627377] rk-pcie fe180000.pcie:      err 0x00f3000000..0x00f30fffff -> 0x00f3000000
[    7.627399] rk-pcie fe180000.pcie:       IO 0x00f3100000..0x00f31fffff -> 0x00f3100000
[    7.627403] rk-pcie fe190000.pcie: IRQ msi not found
[    7.627407] rk-pcie fe190000.pcie: use outband MSI support
[    7.627412] rk-pcie fe190000.pcie: Missing *config* reg space
[    7.627423] rk-pcie fe190000.pcie: host bridge /pcie@fe190000 ranges:
[    7.627457] rk-pcie fe190000.pcie:      err 0x00f4000000..0x00f40fffff -> 0x00f4000000
[    7.627461] rk-pcie fe180000.pcie:      MEM 0x00f3200000..0x00f3ffffff -> 0x00f3200000
[    7.627476] rk-pcie fe180000.pcie:      MEM 0x09c0000000..0x09ffffffff -> 0x09c0000000
[    7.627491] rk-pcie fe190000.pcie:       IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
[    7.627498] iep: Module initialized.
[    7.627507] rk-pcie fe180000.pcie: Missing *config* reg space
[    7.627510] rk-pcie fe190000.pcie:      MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000
[    7.627523] rk-pcie fe190000.pcie:      MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000
[    7.627530] mpp_service mpp-srv: ea89a0945141 author: Yandong Lin 2023-12-20 video: rockchip: mpp: fix watch dog interrupt storm issue
[    7.627534] mpp_service mpp-srv: probe start
[    7.627543] rk-pcie fe180000.pcie: invalid resource
[    7.627550] rk-pcie fe190000.pcie: Missing *config* reg space
[    7.627576] rk-pcie fe190000.pcie: invalid resource
[    7.628544] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    7.628561] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.628726] mpp_vdpu2 fdb50400.vdpu: probe device
[    7.628815] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    7.628821] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    7.628898] mpp_vdpu2 fdb50400.vdpu: probing finish
[    7.629063] mpp_vepu2 jpege-ccu: probing start
[    7.629068] mpp_vepu2 jpege-ccu: probing finish
[    7.629145] mpp_vepu2 fdb50000.vepu: Adding to iommu group 1
[    7.629217] mpp_vepu2 fdb50000.vepu: probing start
[    7.629283] mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
[    7.629287] mpp_vepu2 fdb50000.vepu: reset_group->rw_sem_on=0
[    7.629353] mpp_vepu2 fdb50000.vepu: probing finish
[    7.629444] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    7.629454] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.629567] mpp_vepu2 fdba0000.jpege-core: probing start
[    7.629651] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    7.629714] mpp_vepu2 fdba0000.jpege-core: probing finish
[    7.629799] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    7.629808] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.629917] mpp_vepu2 fdba4000.jpege-core: probing start
[    7.629993] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    7.630058] mpp_vepu2 fdba4000.jpege-core: probing finish
[    7.630142] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    7.630151] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.630258] mpp_vepu2 fdba8000.jpege-core: probing start
[    7.630332] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    7.630395] mpp_vepu2 fdba8000.jpege-core: probing finish
[    7.630467] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    7.630476] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.630584] mpp_vepu2 fdbac000.jpege-core: probing start
[    7.630657] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    7.630720] mpp_vepu2 fdbac000.jpege-core: probing finish
[    7.630948] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    7.630957] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.631066] mpp-iep2 fdbb0000.iep: probe device
[    7.631160] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    7.631217] mpp-iep2 fdbb0000.iep: probing finish
[    7.631394] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    7.631403] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.631569] mpp_jpgdec fdb90000.jpegd: probe device
[    7.631733] mpp_jpgdec fdb90000.jpegd: probing finish
[    7.632046] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    7.632090] mpp_rkvdec2 fdc30000.rkvdec-ccu: ccu-mode: 1
[    7.632093] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    7.632167] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    7.632176] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.632376] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    7.632463] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    7.632467] rkvdec2_init:1022: No niu aclk reset resource define
[    7.632471] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    7.632474] rkvdec2_init:1025: No niu hclk reset resource define
[    7.632489] mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
[    7.632538] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    7.632541] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    7.632669] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
[    7.632673] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
[    7.632676] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[    7.632679] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    7.632683] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    7.632688] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_info_count 20
[    7.632691] mpp_rkvdec2 fdc38100.rkvdec-core: [136, 24576]
[    7.632694] mpp_rkvdec2 fdc38100.rkvdec-core: [137, 49152]
[    7.632697] mpp_rkvdec2 fdc38100.rkvdec-core: [141, 90112]
[    7.632700] mpp_rkvdec2 fdc38100.rkvdec-core: [140, 49152]
[    7.632703] mpp_rkvdec2 fdc38100.rkvdec-core: [139, 180224]
[    7.632706] mpp_rkvdec2 fdc38100.rkvdec-core: [133, 49152]
[    7.632710] mpp_rkvdec2 fdc38100.rkvdec-core: [134, 8192]
[    7.632713] mpp_rkvdec2 fdc38100.rkvdec-core: [135, 4352]
[    7.632716] mpp_rkvdec2 fdc38100.rkvdec-core: [138, 13056]
[    7.632719] mpp_rkvdec2 fdc38100.rkvdec-core: [142, 291584]
[    7.632743] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    7.632794] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    7.632803] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.632985] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    7.633072] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    7.633075] rkvdec2_init:1022: No niu aclk reset resource define
[    7.633079] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    7.633081] rkvdec2_init:1025: No niu hclk reset resource define
[    7.633096] mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
[    7.633132] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    7.633148] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    7.633305] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
[    7.633308] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
[    7.633311] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[    7.633314] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    7.633318] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    7.633322] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_info_count 20
[    7.633326] mpp_rkvdec2 fdc48100.rkvdec-core: [136, 24576]
[    7.633329] mpp_rkvdec2 fdc48100.rkvdec-core: [137, 49152]
[    7.633332] mpp_rkvdec2 fdc48100.rkvdec-core: [141, 90112]
[    7.633335] mpp_rkvdec2 fdc48100.rkvdec-core: [140, 49152]
[    7.633338] mpp_rkvdec2 fdc48100.rkvdec-core: [139, 180224]
[    7.633341] mpp_rkvdec2 fdc48100.rkvdec-core: [133, 49152]
[    7.633344] mpp_rkvdec2 fdc48100.rkvdec-core: [134, 8192]
[    7.633347] mpp_rkvdec2 fdc48100.rkvdec-core: [135, 4352]
[    7.633350] mpp_rkvdec2 fdc48100.rkvdec-core: [138, 13056]
[    7.633353] mpp_rkvdec2 fdc48100.rkvdec-core: [142, 291584]
[    7.633376] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    7.633558] mpp_rkvenc2 rkvenc-ccu: probing start
[    7.633563] mpp_rkvenc2 rkvenc-ccu: probing finish
[    7.633669] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    7.633677] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.633810] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    7.633921] mpp_rkvenc2 fdbd0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19
[    7.633938] rkvenc_init:1905: failed to add venc devfreq
[    7.633962] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    7.634034] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    7.634091] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    7.634100] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.634241] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    7.634337] mpp_rkvenc2 fdbe0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19
[    7.634348] rkvenc_init:1905: failed to add venc devfreq
[    7.634391] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    7.634458] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    7.634898] mpp_av1dec: Adding child /av1d@fdc70000
[    7.635086] mpp_av1dec: register device av1d-master
[    7.635100] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    7.635116] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[    7.635122] mpp_av1dec av1d-master: Adding to iommu group 17
[    7.635132] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.635310] mpp_av1dec av1d-master: probing start
[    7.635468] mpp_av1dec av1d-master: probing finish
[    7.635492] mpp_service mpp-srv: probe success
[    7.635583] Lontium LT9211C driver installing....
[    7.635587] Error: Driver 'LT9211C' is already registered, aborting...
[    7.642884] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    7.642892] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    7.643504] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    7.643510] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    7.644117] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    7.644123] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    7.644628] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    7.644670] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    7.644714] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    7.644752] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    7.644786] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    7.645214] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    7.646100] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    7.646537] feb80000.serial: ttyS5 at MMIO 0xfeb80000 (irq = 116, base_baud = 1500000) is a 16550A
[    7.646743] feba0000.serial: ttyS7 at MMIO 0xfeba0000 (irq = 117, base_baud = 1500000) is a 16550A
[    7.648380] rockchip-vop2 fdd90000.vop: Adding to iommu group 16
[    7.648393] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    7.654261] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    7.654272] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    7.654279] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    7.654285] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    7.654463] [drm] failed to init overlay plane Cluster0-win1
[    7.654489] [drm] failed to init overlay plane Cluster1-win1
[    7.654512] [drm] failed to init overlay plane Cluster2-win1
[    7.654536] [drm] failed to init overlay plane Cluster3-win1
[    7.662340] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc00967df40)
[    7.662739] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    7.663082] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc00968cad0)
[    7.663377] rockchip-drm display-subsystem: failed to parse loader memory
[    7.776818] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    7.776850] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800, flag:0x0) for vp1 dclk: 148500000
[    7.777005] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out1 div: 0 dclk_core1 div: 2
[    7.777013] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop1 to 148500000, get 148500000
[    7.777040] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
[    7.777314] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked!
[    7.777316] dwhdmi-rockchip fde80000.hdmi: final tmdsclk = 148500000
[    7.777343] dwhdmi-rockchip fde80000.hdmi: don't use dsc mode
[    7.777345] dwhdmi-rockchip fde80000.hdmi: dw hdmi qp use tmds mode
[    7.777350] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
[    7.777543] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked!
[    7.793757] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    7.810424] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    7.832724] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
[    7.832730] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    7.834886] Console: switching to colour frame buffer device 240x67
[    7.834904] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    7.851606] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[    7.851927] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    7.855534] dw-hdmi-qp-hdcp dw-hdmi-qp-hdcp.1.auto: dw_hdcp_qp_hdcp_probe success
[    7.857381] brd: module loaded
[    7.858280] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    7.859788] loop: module loaded
[    7.859954] zram: Added device: zram0
[    7.860054] lkdtm: No crash points registered, enable through debugfs
[    7.860598] system_heap: orders[0] = 6
[    7.860602] system_heap: orders[1] = 4
[    7.860606] system_heap: orders[2] = 0
[    7.861875] rockchip-spi feb00000.spi: no high_speed pinctrl state
[    7.862060] rockchip-spi feb00000.spi: probed, poll=0, rsd=0, cs-inactive=0, ready=0
[    7.862354] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    7.863389] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[    7.863606] rk806 spi2.0: ON: 0x40 OFF:0x0
[    7.865056] vdd_gpu_s0: supplied by vcc5v0_sys
[    7.866038] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    7.866554] vdd_log_s0: supplied by vcc5v0_sys
[    7.867058] vdd_vdenc_s0: supplied by vcc5v0_sys
[    7.867616] vdd_ddr_s0: supplied by vcc5v0_sys
[    7.867944] vdd2_ddr_s3: supplied by vcc5v0_sys
[    7.868449] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    7.868901] vcc_3v3_s3: supplied by vcc5v0_sys
[    7.869333] vddq_ddr_s0: supplied by vcc5v0_sys
[    7.869837] vcc_1v8_s3: supplied by vcc5v0_sys
[    7.870348] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    7.870863] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    7.871307] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    7.871755] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    7.872195] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    7.872721] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    7.873282] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    7.873795] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    7.874298] vcc_3v3_s0: supplied by vcc5v0_sys
[    7.874740] vccio_sd_s0: supplied by vcc5v0_sys
[    7.875201] pldo6_s3: supplied by vcc5v0_sys
[    7.875403] rk806 spi2.0: no sleep-setting state
[    7.875408] rk806 spi2.0: no reset-setting pinctrl state
[    7.875412] rk806 spi2.0: no dvs-setting pinctrl state
[    7.876884] rockchip-spi feb20000.spi: probed, poll=0, rsd=0, cs-inactive=0, ready=0
[    7.877366] wk2xxx_init: SPI driver for spi to Uart chip WK2XXX, etc.
[    7.877370] wk2xxx_init: V2.7 On 2024.07.15 firefly
[    7.877387] register firefly_spi_init spi return v = :0
[    7.877690] wireguard: allowedips self-tests: pass
[    7.881068] wireguard: nonce counter self-tests: pass
[    7.884945] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
[    7.884951] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    7.911610] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
[    7.911615] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    7.938279] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
[    7.938284] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    7.964946] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x3
[    7.998691] wireguard: ratelimiter self-tests: pass
[    7.998773] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    7.998777] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    7.999062] tun: Universal TUN/TAP device driver, 1.6
[    7.999127] CAN device driver interface
[    8.000481] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
[    8.000623] rk_gmac-dwmac fe1c0000.ethernet: supply phy not found, using dummy regulator
[    8.000681] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (input).
[    8.000686] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x44).
[    8.000691] rk_gmac-dwmac fe1c0000.ethernet: RX delay(0x18).
[    8.000705] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
[    8.000711] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
[    8.000716] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
[    8.000727] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
[    8.000731] rk_gmac-dwmac fe1c0000.ethernet: clock input from PHY
[    8.000950] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
[    8.001029] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    8.001035] rk_gmac-dwmac fe1c0000.ethernet:         DWMAC4/5
[    8.001040] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
[    8.001044] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
[    8.001048] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
[    8.001052] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
[    8.001080] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
[    8.001083] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    8.001088] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
[    8.001092] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
[    8.001096] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
[    8.135396] usbcore: registered new interface driver asix
[    8.135428] usbcore: registered new interface driver ax88179_178a
[    8.135443] usbcore: registered new interface driver cdc_ether
[    8.135455] usbcore: registered new interface driver net1080
[    8.135467] usbcore: registered new interface driver cdc_subset
[    8.135480] usbcore: registered new interface driver zaurus
[    8.135498] usbcore: registered new interface driver cdc_ncm
[    8.135512] usbcore: registered new interface driver qmi_wwan_q
[    8.135523] usbcore: registered new interface driver qmi_wwan
[    8.143057] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.143069] ehci-pci: EHCI PCI platform driver
[    8.143093] ehci-platform: EHCI generic platform driver
[    8.145319] ehci-platform fc800000.usb: EHCI Host Controller
[    8.145400] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[    8.145458] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000
[    8.158262] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    8.158335] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    8.158340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.158345] usb usb1: Product: EHCI Host Controller
[    8.158349] usb usb1: Manufacturer: Linux 5.10.198 ehci_hcd
[    8.158353] usb usb1: SerialNumber: fc800000.usb
[    8.158515] hub 1-0:1.0: USB hub found
[    8.158527] hub 1-0:1.0: 1 port detected
[    8.160875] ehci-platform fc880000.usb: EHCI Host Controller
[    8.160930] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    8.160976] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000
[    8.171594] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    8.171656] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    8.171660] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.171664] usb usb2: Product: EHCI Host Controller
[    8.171668] usb usb2: Manufacturer: Linux 5.10.198 ehci_hcd
[    8.171672] usb usb2: SerialNumber: fc880000.usb
[    8.171810] hub 2-0:1.0: USB hub found
[    8.171821] hub 2-0:1.0: 1 port detected
[    8.172177] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    8.172186] ohci-platform: OHCI generic platform driver
[    8.172311] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    8.172366] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    8.172403] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000
[    8.232322] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    8.232330] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.232334] usb usb3: Product: Generic Platform OHCI controller
[    8.232338] usb usb3: Manufacturer: Linux 5.10.198 ohci_hcd
[    8.232342] usb usb3: SerialNumber: fc840000.usb
[    8.232489] hub 3-0:1.0: USB hub found
[    8.232501] hub 3-0:1.0: 1 port detected
[    8.232728] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    8.232781] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
[    8.232822] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000
[    8.292315] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    8.292322] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.292326] usb usb4: Product: Generic Platform OHCI controller
[    8.292330] usb usb4: Manufacturer: Linux 5.10.198 ohci_hcd
[    8.292334] usb usb4: SerialNumber: fc8c0000.usb
[    8.292468] hub 4-0:1.0: USB hub found
[    8.292481] hub 4-0:1.0: 1 port detected
[    8.292933] usbcore: registered new interface driver cdc_acm
[    8.292937] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    8.292951] usbcore: registered new interface driver cdc_wdm
[    8.292982] usbcore: registered new interface driver usbserial_generic
[    8.292991] usbserial: USB Serial support registered for generic
[    8.293005] usbcore: registered new interface driver ch341
[    8.293013] usbserial: USB Serial support registered for ch341-uart
[    8.293026] usbcore: registered new interface driver cp210x
[    8.293033] usbserial: USB Serial support registered for cp210x
[    8.293054] usbcore: registered new interface driver ftdi_sio
[    8.293061] usbserial: USB Serial support registered for FTDI USB Serial Device
[    8.293104] usbcore: registered new interface driver keyspan
[    8.293112] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    8.293120] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    8.293127] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    8.293134] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    8.293149] usbcore: registered new interface driver option
[    8.293156] usbserial: USB Serial support registered for GSM modem (1-port)
[    8.293212] usbcore: registered new interface driver oti6858
[    8.293219] usbserial: USB Serial support registered for oti6858
[    8.293232] usbcore: registered new interface driver pl2303
[    8.293240] usbserial: USB Serial support registered for pl2303
[    8.293256] usbcore: registered new interface driver qcserial
[    8.293264] usbserial: USB Serial support registered for Qualcomm USB modem
[    8.293281] usbcore: registered new interface driver sierra
[    8.293289] usbserial: USB Serial support registered for Sierra USB modem
[    8.293661] [HXTP] himax_hx83102_init
[    8.293666] [HXTP] himax_hx83102_probe:Enter
[    8.293669] [HXTP] Himax common touch panel driver init
[    8.293711] usbcore: registered new interface driver usbtouchscreen
[    8.294804] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.4.auto/input/input0
[    8.294998] i2c /dev entries driver
[    8.298422] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    8.306875] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    8.316324] vdd_npu_s0: supplied by vcc5v0_sys
[    8.323027] rtc-hym8563 6-0051: could not init device, -6
[    8.324440] rkcifhw fdce0000.rkcif: Adding to iommu group 15
[    8.324459] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    8.325287] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF
[    8.325364] rkcif rkcif-mipi-lvds: Adding to iommu group 15
[    8.325376] rkcif rkcif-mipi-lvds: rkcif driver version: v00.02.00
[    8.325422] rkcif rkcif-mipi-lvds: attach to cif hw node
[    8.325427] rkcif rkcif-mipi-lvds: rkcif wait line 0
[    8.325432] : terminal subdev does not exist
[    8.325435] : terminal subdev does not exist
[    8.325439] : terminal subdev does not exist
[    8.325442] : terminal subdev does not exist
[    8.325447] : get_remote_sensor: video pad[0] is null
[    8.325451] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    8.325455] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    8.325459] : get_remote_sensor: video pad[0] is null
[    8.325462] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    8.325466] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    8.325469] : get_remote_sensor: video pad[0] is null
[    8.325473] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    8.325476] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    8.325480] : get_remote_sensor: video pad[0] is null
[    8.325483] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    8.325486] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    8.326005] rkcif rkcif-mipi-lvds: No memory-region-thunderboot specified
[    8.326061] rkcif rkcif-mipi-lvds1: Adding to iommu group 15
[    8.326072] rkcif rkcif-mipi-lvds1: rkcif driver version: v00.02.00
[    8.326104] rkcif rkcif-mipi-lvds1: attach to cif hw node
[    8.326108] rkcif rkcif-mipi-lvds1: rkcif wait line 0
[    8.326112] : terminal subdev does not exist
[    8.326116] : terminal subdev does not exist
[    8.326119] : terminal subdev does not exist
[    8.326122] : terminal subdev does not exist
[    8.326126] : get_remote_sensor: video pad[0] is null
[    8.326130] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    8.326134] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    8.326137] : get_remote_sensor: video pad[0] is null
[    8.326140] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    8.326144] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    8.326147] : get_remote_sensor: video pad[0] is null
[    8.326150] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    8.326154] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    8.326157] : get_remote_sensor: video pad[0] is null
[    8.326160] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    8.326164] : rkcif_scale_set_fmt: req(80, 60) src out(0, 0)
[    8.326662] rkcif rkcif-mipi-lvds1: No memory-region-thunderboot specified
[    8.327388] rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: enter mipi csi2 hw probe!
[    8.327449] rockchip-mipi-csi2-hw fdd10000.mipi0-csi2-hw: probe success, v4l2_dev:mipi0-csi2-hw!
[    8.327475] rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: enter mipi csi2 hw probe!
[    8.327517] rockchip-mipi-csi2-hw fdd20000.mipi1-csi2-hw: probe success, v4l2_dev:mipi1-csi2-hw!
[    8.327539] rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: enter mipi csi2 hw probe!
[    8.327577] rockchip-mipi-csi2-hw fdd30000.mipi2-csi2-hw: probe success, v4l2_dev:mipi2-csi2-hw!
[    8.327598] rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: enter mipi csi2 hw probe!
[    8.327638] rockchip-mipi-csi2-hw fdd40000.mipi3-csi2-hw: probe success, v4l2_dev:mipi3-csi2-hw!
[    8.327661] rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: enter mipi csi2 hw probe!
[    8.327700] rockchip-mipi-csi2-hw fdd50000.mipi4-csi2-hw: probe success, v4l2_dev:mipi4-csi2-hw!
[    8.327721] rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: enter mipi csi2 hw probe!
[    8.327758] rockchip-mipi-csi2-hw fdd60000.mipi5-csi2-hw: probe success, v4l2_dev:mipi5-csi2-hw!
[    8.328124] rockchip-mipi-csi2 mipi0-csi2: attach to csi2 hw node
[    8.328144] rkcif rkcif-mipi-lvds: Entity type for entity rockchip-mipi-csi2 was not initialized!
[    8.328150] rockchip-mipi-csi2: Async registered subdev
[    8.328154] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds!
[    8.328281] rockchip-mipi-csi2 mipi1-csi2: attach to csi2 hw node
[    8.328298] rkcif rkcif-mipi-lvds1: Entity type for entity rockchip-mipi-csi2 was not initialized!
[    8.328303] rockchip-mipi-csi2: Async registered subdev
[    8.328306] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds1!
[    8.329004] rkisp_hw fdcb0000.rkisp-unite: Adding to iommu group 14
[    8.329017] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    8.329214] rkisp_hw fdcb0000.rkisp-unite: is_thunderboot: 0
[    8.329221] rkisp_hw fdcb0000.rkisp-unite: Missing rockchip,grf property
[    8.329231] rkisp_hw fdcb0000.rkisp-unite: can't request region for resource [mem 0xfdcb0000-0xfdcbffff]
[    8.329242] rkisp_hw fdcb0000.rkisp-unite: can't request region for resource [mem 0xfdcc0000-0xfdccffff]
[    8.329250] rkisp_hw fdcb0000.rkisp-unite: max input:0x0@0fps
[    8.329329] rkisp_hw fdcb0000.rkisp-unite: no find phandle sram
[    8.329550] rkisp rkisp0-vir0: rkisp driver version: v02.04.00
[    8.329616] rkisp rkisp0-vir0: No memory-region-thunderboot specified
[    8.329667] rkisp rkisp0-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
[    8.330639] usbcore: registered new interface driver uvcvideo
[    8.330643] USB Video Class driver (1.1.1)
[    8.331760] pwm-fan pwm-fan: error -EBUSY: Could not get PWM
[    8.331769] pwm-fan: probe of pwm-fan failed with error -16
[    8.332166] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
[    8.332271] Bluetooth: HCI UART driver ver 2.3
[    8.332276] Bluetooth: HCI UART protocol H4 registered
[    8.332279] Bluetooth: HCI UART protocol ATH3K registered
[    8.332302] usbcore: registered new interface driver bfusb
[    8.333093] cpu cpu0: bin=0
[    8.333307] cpu cpu0: leakage=9
[    8.334723] cpu cpu0: pvtm=1421
[    8.334850] cpu cpu0: pvtm-volt-sel=1
[    8.336753] cpu cpu4: bin=0
[    8.336963] cpu cpu4: leakage=7
[    8.343415] cpu cpu4: pvtm=1639
[    8.347328] cpu cpu4: pvtm-volt-sel=2
[    8.349987] cpu cpu6: bin=0
[    8.350196] cpu cpu6: leakage=7
[    8.356677] cpu cpu6: pvtm=1649
[    8.360610] cpu cpu6: pvtm-volt-sel=3
[    8.362428] cpu cpu0: avs=0
[    8.363468] cpu cpu4: avs=0
[    8.364342] cpu cpu6: avs=0
[    8.364530] cpu cpu0: EM: created perf domain
[    8.364561] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[    8.365106] cpu cpu4: EM: created perf domain
[    8.365130] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    8.373390] cpu cpu6: EM: created perf domain
[    8.373817] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    8.384316] sdhci: Secure Digital Host Controller Interface driver
[    8.384348] sdhci: Copyright(c) Pierre Ossman
[    8.384355] Synopsys Designware Multimedia Card Interface Driver
[    8.384692] sdhci-pltfm: SDHCI platform and OF driver helper
[    8.386480] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    8.386559] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    8.387517] cryptodev: driver 1.12 loaded.
[    8.387580] hid: raw HID events driver (C) Jiri Kosina
[    8.387807] usbcore: registered new interface driver usbhid
[    8.387815] usbhid: USB HID core driver
[    8.388071] ashmem: initialized
[    8.397832] Firefly adc init
[    8.397850] Firefly adc-->FIREFLY_ADC_SAMPLE_JIFFIES:  16 
[    8.397855] Firefly adc-->MSEC_PER_SEC:  1000 
[    8.397859] Firefly adc-->HZ:  300 
[    8.398028] Firefly adc-->ret:  0 
[    8.398194] optee: probing for conduit method.
[    8.398211] optee: revision 3.13 (62aa10b7)
[    8.398659] optee: dynamic shared memory is enabled
[    8.398793] optee: initialized driver
[    8.399278] usbcore: registered new interface driver snd-usb-audio
[    8.403629] rockchip-i2s-tdm fe470000.i2s: Register PCM for TRCM mode
[    8.406127] input: headset-keys as /devices/platform/es8388-sound/input/input1
[    8.408322] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    8.417080] ES8323 7-0011: ASoC: error at soc_component_write_no_lock on ES8323.7-0011: -5
[    8.417540] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    8.457627] mmc0: Host Software Queue enabled
[    8.457652] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    8.458084] mmcblk0: mmc0:0001 DA4064 58.2 GiB 
[    8.458312] mmcblk0boot0: mmc0:0001 DA4064 partition 1 4.00 MiB
[    8.458579] mmcblk0boot1: mmc0:0001 DA4064 partition 2 4.00 MiB
[    8.458834] mmcblk0rpmb: mmc0:0001 DA4064 partition 3 16.0 MiB, chardev (511:0)
[    8.469080] input: rockchip-es8388 Headset as /devices/platform/es8388-sound/sound/card0/input2
[    8.470042] Initializing XFRM netlink socket
[    8.470271] NET: Registered protocol family 10
[    8.470868] Segment Routing with IPv6
[    8.470902] NET: Registered protocol family 17
[    8.470914] NET: Registered protocol family 15
[    8.470947] Bridge firewalling registered
[    8.470952] can: controller area network core
[    8.470976] NET: Registered protocol family 29
[    8.470981] can: raw protocol
[    8.470987] can: broadcast manager protocol
[    8.470997] can: netlink gateway - max_hops=1
[    8.471262] Bluetooth: RFCOMM TTY layer initialized
[    8.471285] Bluetooth: RFCOMM socket layer initialized
[    8.471314] Bluetooth: RFCOMM ver 1.11
[    8.471327] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.471334] Bluetooth: BNEP filters: protocol multicast
[    8.471344] Bluetooth: BNEP socket layer initialized
[    8.471352] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    8.471362] Bluetooth: HIDP socket layer initialized
[    8.471410] 8021q: 802.1Q VLAN Support v1.8
[    8.471487] [BT_RFKILL]: Enter rfkill_rk_init
[    8.471494] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    8.472000] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    8.472023] [WLAN_RFKILL]: can't find rockchip,grf property
[    8.472028] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = rtl8852be
[    8.472034] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    8.472039] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    8.472100] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 0, flags = 0.
[    8.472108] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    8.472113] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    8.472119] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    8.472125] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    8.472359] Key type dns_resolver registered
[    8.473402] imx577 1-001a: driver version: 00.01.05
[    8.473445] imx577 1-001a:  Get hdr mode failed! no hdr default
[    8.473477] imx577 1-001a: Failed to get power-gpios, maybe no use
[    8.473598] imx577 1-001a: supply avdd not found, using dummy regulator
[    8.473710] imx577 1-001a: supply dovdd not found, using dummy regulator
[    8.473746] imx577 1-001a: supply dvdd not found, using dummy regulator
[    8.473814] imx577 1-001a: could not get default pinstate
[    8.473820] imx577 1-001a: could not get sleep pinstate
[    8.474006] vendor storage:20190527 ret = 0
[    8.477002] imx577 1-001a: Unexpected sensor id(0000), ret(-5)
[    8.477481] imx577 7-001a: driver version: 00.01.05
[    8.477491] imx577 7-001a:  Get hdr mode failed! no hdr default
[    8.477547] imx577 7-001a: supply avdd not found, using dummy regulator
[    8.477617] imx577 7-001a: supply dovdd not found, using dummy regulator
[    8.477649] imx577 7-001a: supply dvdd not found, using dummy regulator
[    8.477673] imx577 7-001a: could not get default pinstate
[    8.477679] imx577 7-001a: could not get sleep pinstate
[    8.482009] imx577 7-001a: Unexpected sensor id(0000), ret(-5)
[    8.483007] registered taskstats version 1
[    8.483048] Loading compiled-in X.509 certificates
[    8.484520] Btrfs loaded, crc32c=crc32c-generic
[    8.484622] pstore: Using crash dump compression: deflate
[    8.485065] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    8.485084] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    8.485230] rga: rga3_core0, irq = 33, match scheduler
[    8.485602] rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
[    8.485647] rga: rga3_core0 probe successfully
[    8.485953] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    8.485981] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    8.486118] rga: rga3_core1, irq = 34, match scheduler
[    8.486697] rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
[    8.486766] rga: rga3_core1 probe successfully
[    8.487241] rga: rga2, irq = 35, match scheduler
[    8.487629] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
[    8.487640] rga: rga2 probe successfully
[    8.487830] rga_iommu: IOMMU binding successfully, default mapping core[0x1]
[    8.487960] rga: Module initialized. v1.3.1
[    8.487969] 
[    8.487974] ********************************************************************
[    8.487978] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    8.487983] **                                                                **
[    8.487986] **  WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[    8.487990] **                                                                **
[    8.487995] ** This means that this kernel is built to expose clk operations  **
[    8.487999] ** such as parent or rate setting, enabling, disabling, etc.      **
[    8.488002] ** to userspace, which may compromise security on your system.    **
[    8.488006] **                                                                **
[    8.488010] ** If you see this message and you are not debugging the          **
[    8.488014] ** kernel, report this immediately to your vendor!                **
[    8.488018] **                                                                **
[    8.488022] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    8.488026] ********************************************************************
[    8.520602] combophy_avdd0v85: supplied by vdd_0v85_s0
[    8.524518] mali fb000000.gpu: Kernel DDK version g18p0-01eac0
[    8.527873] combophy_avdd1v8: supplied by avcc_1v8_s0
[    8.528401] mali fb000000.gpu: bin=0
[    8.528475] vcc3v3_lcd0_n: supplied by vcc_3v3_s0
[    8.528639] mali fb000000.gpu: leakage=14
[    8.528682] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[    8.529072] vcc_1v2_cam_s0: supplied by vcc_3v3_s3
[    8.529537] vcc_1v8_cam_s0: supplied by vcc_3v3_s3
[    8.529995] vcc_2v8_cam_s0: supplied by vcc_3v3_s3
[    8.530231] mali fb000000.gpu: pvtm=865
[    8.530533] vcc_3v3_sd_s0: supplied by vcc_3v3_s3
[    8.530540] mali fb000000.gpu: pvtm-volt-sel=3
[    8.531547] rockchip-csi2-dphy csi2-dcphy0: csi2 dphy0 probe successfully!
[    8.531871] mali fb000000.gpu: avs=0
[    8.531916] rockchip-csi2-dphy csi2-dcphy1: csi2 dphy0 probe successfully!
[    8.531925] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 143; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    8.532231] input: adc-keys as /devices/platform/adc-keys/input/input3
[    8.535362] mali fb000000.gpu: r0p0 status 5 not found in HW issues table;
[    8.535371] mali fb000000.gpu: falling back to closest match: r0p0 status 0
[    8.535378] mali fb000000.gpu: Execution proceeding normally with fallback match
[    8.535385] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    8.535433] mali fb000000.gpu: No priority control manager is configured
[    8.535571] rkcif rkcif-mipi-lvds: clear unready subdev num: 1
[    8.535629] mali fb000000.gpu: No memory group manager is configured
[    8.535656] mali fb000000.gpu: Protected memory allocator not available
[    8.536330] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
[    8.536610] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    8.536941] : get_remote_sensor: remote pad is null
[    8.536950] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    8.536956] : There is not terminal subdev, not synchronized with ISP
[    8.536965] rkcif rkcif-mipi-lvds1: clear unready subdev num: 1
[    8.538106] : get_remote_sensor: remote pad is null
[    8.538114] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    8.538119] : There is not terminal subdev, not synchronized with ISP
[    8.539027] dwmmc_rockchip fe2c0000.mmc: No normal pinctrl state
[    8.539036] dwmmc_rockchip fe2c0000.mmc: No idle pinctrl state
[    8.539134] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    8.539154] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    8.539164] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    8.539194] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 99,32 bit host data width,256 deep fifo
[    8.539753] RKNPU fdab0000.npu: Adding to iommu group 0
[    8.539776] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    8.539885] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    8.540911] mali fb000000.gpu: Probed as mali0, this is r1_on_g18_on_linux-5.10-gen-rkr4.1_for_defect_414343 
[    8.541114] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    8.541134] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    8.541148] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    8.541595] [drm] Initialized rknpu 0.9.3 20231121 for fdab0000.npu on minor 1
[    8.545263] RKNPU fdab0000.npu: RKNPU: bin=0
[    8.545477] RKNPU fdab0000.npu: leakage=7
[    8.547789] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[    8.553195] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    8.556226] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
[    8.556237] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    8.556244] usb 1-1: Product: USB 2.0 Hub [MTT]
[    8.556830] hub 1-1:1.0: USB hub found
[    8.557095] hub 1-1:1.0: 7 ports detected
[    8.559712] RKNPU fdab0000.npu: pvtm=860
[    8.564309] RKNPU fdab0000.npu: pvtm-volt-sel=2
[    8.565655] RKNPU fdab0000.npu: avs=0
[    8.565834] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    8.578301] RKNPU fdab0000.npu: failed to find power_model node
[    8.578335] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    8.578344] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    8.579558] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.585773] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.586052] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    8.586065] cfg80211: failed to load regulatory.db
[    8.587754] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    8.588163] rockchip-suspend not set sleep-mode-config for mem-lite
[    8.588178] rockchip-suspend not set wakeup-config for mem-lite
[    8.588187] rockchip-suspend not set sleep-mode-config for mem-ultra
[    8.588193] rockchip-suspend not set wakeup-config for mem-ultra
[    8.589237] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 406; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '2.
[    8.589638] Mali: 
[    8.589641] Mali device driver loaded
[    8.589653] rkisp rkisp0-vir0: clear unready subdev num: 2
[    8.591823] ret 1024 1
[    8.591920] ALSA device list:
[    8.591927]   #0: rockchip-es8388
[    8.595575] Freeing unused kernel memory: 7808K
[    8.611474] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    8.625663] Run /init as init process
[    8.639497] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 205
[    8.639534] mmc1: new ultra high speed SDR104 SDXC card at address 59b4
[    8.640058] mmcblk1: mmc1:59b4 GD2S5 119 GiB 
[    8.644011] GPT:last_usable_lbas don't match.
[    8.644039] GPT:250347455 != 250347486
[    8.644045] GPT: Use GNU Parted to correct GPT errors.
[    8.644072]  mmcblk1: p1 p2 p3 p4 p5 p6 p7
