rk3399 typec USB 异常，adb 不能使用
嗨，各位：我刚买了个Rk3399 ，刷完固件后，连接typec 线，发现adb 端口一直没出来，打开串口发现 fusb报错。
请问下，这个是啥原因？是我刷的固件不对吗？
收←◆[ 3361.077505] fusb302 4-0022: connection has disconnected
收←◆[ 3361.262519] fusb302 4-0022: connection has disconnected
收←◆[ 3361.445847] fusb302 4-0022: connection has disconnected
收←◆[ 3361.630660] fusb302 4-0022: connection has disconnected
收←◆[ 3361.816170] fusb302 4-0022: connection has disconnected
收←◆[ 3361.997501] fusb302 4-0022: connection has disconnected
收←◆[ 3362.183838] fusb302 4-0022: connection has disconnected
你用的具体型号是啥？实物拍照连线看看 嗨，型号是 RK3399 SBDTMF992 1650 是这个吗？
风火轮用户36502 发表于 2018-9-12 18:02
你用的具体型号是啥？实物拍照连线看看
你看看我的附件，能不能看到你需要的信息 估计是你没烧录对固件，
你烧录这个试试
https://pan.baidu.com/s/1o7Cdilk#list/path=%2FPublic%2FDevBoard%2FFirefly-RK3399%2FFirmware%2FAndroid%2FAndroid7.1%2FFirefly-RK3399_Android7.1.2_MP_180706&parentPath=%2FPublic%2FDevBoard 如果烧录上面那个固件还不行，你就参考这个贴子操作一下，就OK了
http://smartfire.cn/thread-702-1-1.html
风火轮用户36502 发表于 2018-9-12 18:28
如果烧录上面那个固件还不行，你就参考这个贴子操作一下，就OK了
http://smartfire.cn/thread-702-1-1.html ...
这个帖子的方法我试过了，不行。从日志看，usb 报错，后面的4-0032好像是 i2c地址，所以会不会是I2C通信失败。 风火轮用户36502 发表于 2018-9-12 18:26
估计是你没烧录对固件，
你烧录这个试试
我下载的就是这个固件。
一模一样的，还是有问题 typeC USB和IIC没有关系的
那你烧录最新的8.1的吧
https://pan.baidu.com/s/1o7Cdilk#list/path=%2FPublic%2FDevBoard%2FFirefly-RK3399%2FFirmware%2FAndroid%2FAndroid8.1&parentPath=%2FPublic%2FDevBoard
风火轮用户36502 发表于 2018-9-12 19:12
typeC USB和IIC没有关系的
那你烧录最新的8.1的吧
完全开不了机。
烧完 启动 就进入bootlader了。
收←◆\0
收←◆\0
收←◆\0
收←◆DDR Version 1.12 20180518
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg = 0x32817281, stride = 0x9
OUT
收←◆Boot1: 2018-04-08, version: 1.12
CPUId = 0x0
ChipType = 0x10, 216
收←◆SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
SdmmcInit=0 1
StorageInit ok = 67813
LoadTrustBL
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xa8e1c
RunBL31 0x10000
NOTICE:BL31: v1.3(debug):65aa5ce
NOTICE:BL31: Built : 10:47:37, Jun 19 2018
NOTICE:BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1151): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF TEE-CORE:init_primary_helper:337: Initializing (1.1.0-170-gc4654a6 #16 Wed May 30 08:54:30 UTC 2018 aarch64)
INF TEE-CORE:init_primary_helper:338: Release version: 1.2
INF TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2014.10-RK3399-06 (Jul 20 2018 - 09:42:54)
CPU: rk3399
cpu version = 0
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 800000000HZ
aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
cpll = 800000000HZ
dpll = 800000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM:Found dram banks: 1
Adding bank:0000000000200000(000000007fe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01e00000
128 MiB
收←◆SdmmcInit = 0 20
收←◆storage init OK!
Using default environment
GetParam
Load FDT from resource image.
power key: bank-0 pin-5
can't find dts node for fixed
usb bc: can find node by path: /dwc-control-usb/usb_bc
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=66
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 800000000HZ
aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
cpll = 800000000HZ
dpll = 800000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Can't find dts node for fuel guage cw201x
can't find dts node for ec-battery
Can't find dts node for charger bq25700
invalide header tag
ca head not found
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2018-07-20#1.12
empty serial no.
normal boot.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
Rockchip UBOOT DRM driver version: develop-v1.0.0
failed to find panel driver
read logo on state from dts
no fuel gauge found
i2c read reg no interrupt
i2c read reg no interrupt
i2c read reg no interrupt
i2c read reg no interrupt
收←◆ i2c read reg no interrupt
can't get edid block:0
failed to get edid
drm_rk_selete_output; fail get baseparameter
rk lcdc - 0 dclk set: dclk = 148500000HZ, pll select = 0, div = 1
rockchip_panel_prepare: failed to find panel prepare funcs
CEA mode used vic=16
dw_hdmi_setup HDMI mode
rockchip_panel_enable: failed to find panel prepare funcs
Hit any key to stop autoboot:0
收←◆load fdt from resouce.
vendor read error!
Set oem_unlocked=0Secure Boot state: 0
kernel @ 0x00280000 (0x0123d808)
ramdisk@ 0x04bf0000 (0x00178860)
bootrk: do_bootm_linux...
Loading Device Tree to 0000000004600000, end 0000000004616027 ... OK
Add bank:0000000000200000, 0000000008200000
Add bank:000000000a200000, 0000000075e00000
WARNING: could not set reg FDT_ERR_BADOFFSET.
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Initializing cgroup subsys schedtune
[ 0.000000] Linux version 4.4.126 (liangkd@tchip-server) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #87 SMP PREEMPT Thu Aug 2 19:14:17 CST 2018
[ 0.000000] Boot CPU: AArch64 Processor
[ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[ 0.000000] bootconsole enabled
[ 0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
收←◆[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eefd000 s45528 r8192 d32296 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 507912
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.veritymode=/dev/block/platform/ff0f0000.dwmmc/by-name/metadata androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/initmtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x00010000@0x00010000(kernel),0x00010000@0x00020000(boot),0x00020000@0x00030000(recovery),0x00038000@0x00050000(backup),0x00002000@0x00088000(security),0x00100000@0x0008a000(cache),0x00500000@0x0018a000(system),0x00008000@0x0068a000(metadata),0x00100000@0x00692000(vendor),0x00100000@0x00794000(oem),0x00000400@0x00894000(frp),-@0x00894400(userdata) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2018-07-20_09:42:54 SecureBootCheckOk=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] software IO TLB (0MB) mapped at
收←◆[ 0.000000] Memory: 1988544K/2064384K available (10878K kernel code, 1718K rwdata, 5228K rodata, 832K init, 1126K bss, 59456K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8009040000 - 0xffffff8009110000 ( 832 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008b20000 ( 10880 KB)
[ 0.000000] .rodata : 0xffffff8008b20000 - 0xffffff8009040000 (5248 KB)
[ 0.000000] .data : 0xffffff8009110000 - 0xffffff80092bd808 (1719 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 (4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory: 0xffffffc000200000 - 0xffffffc080000000 (2046 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000000a280000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000000a290000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }
[ 0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
收←◆[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001822] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.002785] pid_max: default: 32768 minimum: 301
[ 0.003273] Security Framework initialized
[ 0.003661] SELinux:Initializing.
[ 0.004090] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.004719] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.006151] Initializing cgroup subsys memory
[ 0.006584] Initializing cgroup subsys freezer
[ 0.007885] sched-energy: Sched-energy-costs installed from DT
[ 0.008434] CPU0: update cpu_capacity 401
[ 0.008887] ASID allocator initialised with 32768 entries
[ 0.025717] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.026950] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
收←◆[ 0.039119] Detected VIPT I-cache on CPU1
[ 0.039150] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.039185] CPU1: using LPI pending table @0x000000000a3f0000
[ 0.039227] CPU1: update cpu_capacity 401
[ 0.039230] CPU1: Booted secondary processor
[ 0.049104] Detected VIPT I-cache on CPU2
[ 0.049125] CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.049158] CPU2: using LPI pending table @0x000000007c020000
[ 0.049185] CPU2: update cpu_capacity 401
[ 0.049188] CPU2: Booted secondary processor
[ 0.059136] Detected VIPT I-cache on CPU3
[ 0.059156] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.059188] CPU3: using LPI pending table @0x000000007c060000
[ 0.059215] CPU3: update cpu_capacity 401
[ 0.059218] CPU3: Booted secondary processor
[ 0.069185] Detected PIPT I-cache on CPU4
[ 0.069213] CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.069253] CPU4: using LPI pending table @0x000000007c0b0000
[ 0.069292] CPU4: update cpu_capacity 1024
[ 0.069295] CPU4: Booted secondary processor
[ 0.079211] Detected PIPT I-cache on CPU5
[ 0.079229] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.079265] CPU5: using LPI pending table @0x000000007c0e0000
[ 0.079293] CPU5: update cpu_capacity 1024
[ 0.079296] CPU5: Booted secondary processor
[ 0.079379] Brought up 6 CPUs
[ 0.091480] SMP: Total of 6 processors activated.
[ 0.091922] CPU features: detected feature: GIC system register CPU interface
[ 0.092593] CPU: All CPU(s) started at EL2
[ 0.093015] alternatives: patching kernel code
[ 0.095343] devtmpfs: initialized
[ 0.115194] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.116167] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.117518] pinctrl core: initialized pinctrl subsystem
[ 0.119436] Failed to find legacy iommu devices
[ 0.120237] NET: Registered protocol family 16
[ 0.121049] schedtune: init normalization constants...
[ 0.121552] schedtune: CLUSTER min_pwr: 56 max_pwr: 222
[ 0.122186] schedtune: CPU min_pwr: 0 max_pwr: 222
[ 0.122830] schedtune: CPU min_pwr: 0 max_pwr: 222
[ 0.123463] schedtune: CPU min_pwr: 0 max_pwr: 222
[ 0.124095] schedtune: CPU min_pwr: 0 max_pwr: 222
[ 0.124728] schedtune: CLUSTER min_pwr: 65 max_pwr:1108
[ 0.125360] schedtune: CPU min_pwr: 0 max_pwr:1108
[ 0.125992] schedtune: CPU min_pwr: 0 max_pwr:1108
[ 0.126630] schedtune: SYSTEM min_pwr: 121 max_pwr:4434
[ 0.127263] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12
[ 0.128002] schedtune: verify normalization constants...
[ 0.128517] schedtune: max_pwr/2^0: 4313 => norm_pwr:1024
[ 0.129057] schedtune: max_pwr/2^1: 2156 => norm_pwr: 511
[ 0.129597] schedtune: max_pwr/2^2: 1078 => norm_pwr: 255
[ 0.130142] schedtune: max_pwr/2^3:539 => norm_pwr: 127
[ 0.130681] schedtune: max_pwr/2^4:269 => norm_pwr: 63
[ 0.131221] schedtune: max_pwr/2^5:134 => norm_pwr: 31
[ 0.131760] schedtune: configured to support 5 boost groups
[ 0.140178] cpuidle: using governor ladder
[ 0.150179] cpuidle: using governor menu
[ 0.150574] Registered FIQ tty driver
[ 0.151274] vdso: 2 pages (1 code @ ffffff8008b26000, 1 data @ ffffff8009114000)
[ 0.152010] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.153349] DMA: preallocated 256 KiB pool for atomic allocations
收←◆[ 0.174184] console enabled
[ 0.174783] pstore: Registered ramoops as persistent store backend
[ 0.175386] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[ 0.178201] fiq debugger fiq mode enabled
[ [ 0.178837] console enabled
0.178837] console enabled
[ 0.179520] bootconsole disabled
[ 0.179520] bootconsole disabled
[ 0.180085] Registered fiq debugger ttyFIQ0
收←◆[ 0.211131] iommu: Adding device ff650000.vpu_service to group 0
[ 0.211207] iommu: Adding device ff660000.rkvdec to group 1
[ 0.211283] iommu: Adding device ff670000.iep to group 2
[ 0.211378] iommu: Adding device ff8f0000.vop to group 3
[ 0.211448] iommu: Adding device ff900000.vop to group 4
[ 0.211548] iommu: Adding device ff910000.isp to group 5
[ 0.211618] iommu: Adding device ff920000.isp to group 6
[ 0.212284] rk_iommu ff670800.iommu: can't get aclk
[ 0.212297] rk_iommu ff670800.iommu: can't get hclk
[ 0.213131] SCSI subsystem initialized
[ 0.213305] usbcore: registered new interface driver usbfs
[ 0.213350] usbcore: registered new interface driver hub
[ 0.213426] usbcore: registered new device driver usb
[ 0.213769] media: Linux media interface: v0.10
[ 0.213805] Linux video capture interface: v2.00
[ 0.213979] pps_core: LinuxPPS API ver. 1 registered
[ 0.213992] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.214014] PTP clock support registered
[ 0.215600] Advanced Linux Sound Architecture Driver Initialized.
[ 0.216133] Bluetooth: Core ver 2.21
[ 0.216168] NET: Registered protocol family 31
[ 0.216177] Bluetooth: HCI device and connection manager initialized
[ 0.216190] Bluetooth: HCI socket layer initialized
[ 0.216201] Bluetooth: L2CAP socket layer initialized
[ 0.216226] Bluetooth: SCO socket layer initialized
[ 0.216961] rockchip-cpuinfo cpuinfo: Serial : 9e286cde915a635e
[ 0.217441] clocksource: Switched to clocksource arch_sys_counter
收←◆[ 0.259421] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.259663] NET: Registered protocol family 2
[ 0.260082] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.260204] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.260336] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.260409] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.260437] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.260584] NET: Registered protocol family 1
[ 0.261429] Trying to unpack rootfs image as initramfs...
收←◆[ 0.328476] Freeing initrd memory: 1504K
[ 0.329019] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.329106] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.331951] audit: initializing netlink subsys (disabled)
[ 0.332011] audit: type=2000 audit(0.330:1): initialized
[ 0.337118] VFS: Disk quotas dquot_6.6.0
[ 0.337242] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.338284] Registering sdcardfs 0.1
[ 0.338856] fuse init (API version 7.23)
[ 0.339919]
[ 0.339919] TEE Core Framework initialization (ver 1:0.1)
[ 0.339945] TEE armv7 Driver initialization
[ 0.340289] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[ 0.340305] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[ 0.340559] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[ 0.344537] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.344558] io scheduler noop registered
[ 0.344717] io scheduler cfq registered (default)
[ 0.345898] phy phy-ff770000.syscon:usb2-phy@e460.0: Failed to get VBUS supply regulator
[ 0.350624] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 0.350648] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 0.350662] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
收←◆[ 0.870825] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 0.871005] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 0.871933] iep: failed to find iep power down clock source.
[ 0.872470] IEP Power ON
[ 0.872735] IEP Power OFF
[ 0.872847] IEP Driver loaded succesfully
[ 0.873101] Module initialized.
[ 0.873500] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[ 0.873810] rk-vcodec ff650000.vpu_service: probe device
[ 0.873865] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc07c25a010
[ 0.874030] rk-vcodec ff650000.vpu_service: allocator is drm
[ 0.874089] rk-vcodec ff650000.vpu_service: checking hw id 0
[ 0.874623] rk-vcodec ff650000.vpu_service: could not find power_model node
[ 0.874637] rk-vcodec ff650000.vpu_service: init success
[ 0.874827] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[ 0.875227] rk-vcodec ff660000.rkvdec: probe device
[ 0.875270] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc07c25a810
[ 0.875401] rk-vcodec ff660000.rkvdec: allocator is drm
[ 0.875458] rk-vcodec ff660000.rkvdec: checking hw id 6876
[ 0.875804] rk-vcodec ff660000.rkvdec: could not find power_model node
[ 0.875816] rk-vcodec ff660000.rkvdec: init success
[ 0.877301] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.877317] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.878683] dma-pl330 ff6e0000.dma-co;roller: Loaded driver for PL330 DMAC-241330
[ 0.878701] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.880402] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 0.882151] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
[ 0.882462] rockchip-pinctrl pinctrl: pin gpio4-19 already requested by fiq-debugger; cannot claim for ff1a0000.serial
[ 0.882479] rockchip-pinctrl pinctrl: pin-147 (ff1a0000.serial) status -22
[ 0.882491] rockchip-pinctrl pinctrl: could not request pin 147 (gpio4-19) from group uart2c-xferon device rockchip-pinctrl
[ 0.882501] dw-apb-uart ff1a0000.serial: Error applying setting, reverse things back
[ 0.882775] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
[ 0.883336] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 40, base_baud = 1500000) is a 16550A
[ 0.883700] Initialized drm 1.1.0 20060810
[ 0.886943] Rockchip DRM driver version: v1.0.1
[ 0.888904] Unable to detect cache hierarchy for CPU 0
收←◆[ 0.943831] brd: module loaded
收←◆[ 0.972152] loop: module loaded
[ 0.976043] zram: Added device: zram0
[ 0.980223] SCSI Media Changer driver v0.25
[ 0.984212] tun: Universal TUN/TAP device driver, 1.6
[ 0.984225] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.985244] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 0.985265] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 0.985277] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
[ 0.985301] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 0.985457] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 0.985469] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 0.990484] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 0.990599] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 0.990610]Ring mode enabled
[ 0.990618]DMA HW capability register supported
[ 0.990625]Normal descriptors
[ 0.990634]RX Checksum Offload Engine supported (type 2)
[ 0.990641]TX Checksum insertion supported
[ 0.990647]Wake-Up On Lan supported
[ 0.990690]Enable RX Mitigation via HW Watchdog Timer
收←◆[ 1.060167] libphy: stmmac: probed
[ 1.060185] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 1.060195] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 1.061051] PPP generic driver version 2.4.2
[ 1.061214] PPP BSD Compression module registered
[ 1.061229] PPP Deflate Compression module registered
[ 1.061264] PPP MPPE Compression module registered
[ 1.061284] NET: Registered protocol family 24
[ 1.061327] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1.061335] CSLIP: code copyright 1989 Regents of the University of California.
[ 1.061353] Rockchip WiFi SYS interface (V1.00) ...
[ 1.061432] usbcore: registered new interface driver catc
[ 1.061477] usbcore: registered new interface driver kaweth
[ 1.061496] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 1.061530] usbcore: registered new interface driver pegasus
[ 1.061570] usbcore: registered new interface driver rtl8150
[ 1.061613] usbcore: registered new interface driver r8152
[ 1.061627] hso: drivers/net/usb/hso.c: Option Wireless
[ 1.061679] usbcore: registered new interface driver hso
[ 1.061737] usbcore: registered new interface driver asix
[ 1.061779] usbcore: registered new interface driver ax88179_178a
[ 1.061819] usbcore: registered new interface driver cdc_ether
[ 1.061859] usbcore: registered new interface driver cdc_eem
[ 1.061898] usbcore: registered new interface driver dm9601
[ 1.061965] usbcore: registered new interface driver smsc75xx
[ 1.062013] usbcore: registered new interface driver smsc95xx
[ 1.062053] usbcore: registered new interface driver gl620a
[ 1.062093] usbcore: registered new interface driver net1080
[ 1.062132] usbcore: registered new interface driver plusb
[ 1.062179] usbcore: registered new interface driver rndis_host
[ 1.062221] usbcore: registered new interface driver cdc_subset
[ 1.062261] usbcore: registered new interface driver zaurus
[ 1.062302] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 1.062357] usbcore: registered new interface driver int51x1
[ 1.062401] usbcore: registered new interface driver kalmia
[ 1.062445] usbcore: registered new interface driver ipheth
[ 1.062488] usbcore: registered new interface driver sierra_net
[ 1.062531] usbcore: registered new interface driver cx82310_eth
[ 1.062580] usbcore: registered new interface driver cdc_ncm
[ 1.062628] usbcore: registered new interface driver qmi_wwan
[ 1.062673] usbcore: registered new interface driver cdc_mbim
[ 1.063776] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3
[ 1.068728] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[ 1.070418] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.070474] ehci-pci: EHCI PCI platform driver
[ 1.070570] ehci-platform: EHCI generic platform driver
[ 1.074169] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 1.074429] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[ 1.074644] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[ 1.084133] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.084361] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.084408] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.084423] usb usb1: Product: EHCI Host Controller
[ 1.084437] usb usb1: Manufacturer: Linux 4.4.126 ehci_hcd
[ 1.084449] usb usb1: SerialNumber: fe3c0000.usb
[ 1.085091] hub 1-0:1.0: USB hub found
[ 1.085170] hub 1-0:1.0: 1 port detected
[ 1.085974] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.086043] ohci-platform: OHCI generic platform driver
[ 1.086640] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 1.086927] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[ 1.087157] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
收←◆[ 1.141660] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.141710] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.141724] usb usb2: Product: Generic Platform OHCI controller
[ 1.141737] usb usb2: Manufacturer: Linux 4.4.126 ohci_hcd
[ 1.141749] usb usb2: SerialNumber: fe3e0000.usb
[ 1.142352] hub 2-0:1.0: USB hub found
[ 1.142429] hub 2-0:1.0: 1 port detected
[ 1.143714] usbcore: registered new interface driver cdc_acm
[ 1.143757] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.143838] usbcore: registered new interface driver usblp
[ 1.143909] usbcore: registered new interface driver cdc_wdm
[ 1.144007] usbcore: registered new interface driver uas
[ 1.144136] usbcore: registered new interface driver usb-storage
[ 1.144227] usbcore: registered new interface driver ums-alauda
[ 1.144284] usbcore: registered new interface driver ums-cypress
[ 1.144343] usbcore: registered new interface driver ums-datafab
[ 1.144432] usbcore: registered new interface driver ums_eneub6250
[ 1.144494] usbcore: registered new interface driver ums-freecom
[ 1.144557] usbcore: registered new interface driver ums-isd200
[ 1.144645] usbcore: registered new interface driver ums-jumpshot
[ 1.144700] usbcore: registered new interface driver ums-karma
[ 1.144758] usbcore: registered new interface driver ums-onetouch
[ 1.144816] usbcore: registered new interface driver ums-sddr09
[ 1.144905] usbcore: registered new interface driver ums-sddr55
[ 1.144960] usbcore: registered new interface driver ums-usbat
[ 1.145076] usbcore: registered new interface driver usbserial
[ 1.145157] usbcore: registered new interface driver usbserial_generic
[ 1.145198] usbserial: USB Serial support registered for generic
[ 1.145260] usbcore: registered new interface driver option
[ 1.145330] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.145493] usbcore: registered new interface driver trancevibrator
[ 1.145543] usb20_otg: version 3.10a 21-DEC-2012
[ 1.145825] usb20_host: version 3.10a 21-DEC-2012
[ 1.146603] usbcore: registered new interface driver xpad
[ 1.146706] usbcore: registered new interface driver usb_acecad
[ 1.146802] usbcore: registered new interface driver aiptek
[ 1.146861] usbcore: registered new interface driver gtco
[ 1.146925] usbcore: registered new interface driver hanwang
[ 1.147015] usbcore: registered new interface driver kbtab
[ 1.147778] .. rk pwm remotectl v1.1 init
[ 1.148126] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[ 1.148758] sensor_register_slave:kxtj9,id=11
[ 1.148808] sensor_register_slave:mma8452,id=17
[ 1.148823] sensor_register_slave:lis3dh,id=7
[ 1.148838] sensor_register_slave:mma7660,id=18
[ 1.148852] sensor_register_slave:lsm303d,id=22
[ 1.148865] sensor_register_slave:gs_mc3230,id=23
[ 1.148874] gsensor_init
[ 1.148889] sensor_register_slave:mpu6880_acc,id=24
[ 1.148903] sensor_register_slave:mpu6500_acc,id=25
[ 1.148917] sensor_register_slave:lsm330_acc,id=26
[ 1.148931] sensor_register_slave:bma2xx_acc,id=27
[ 1.148946] sensor_register_slave:akm8975,id=30
[ 1.148962] sensor_register_slave:akm8963,id=31
[ 1.149016] sensor_register_slave:l3g4200d,id=45
[ 1.149031] sensor_register_slave:l3g20d,id=46
[ 1.149045] sensor_register_slave:ewtsa,id=47
[ 1.149060] sensor_register_slave:lsm330_gyro,id=51
[ 1.149074] sensor_register_slave:cm3217,id=53
[ 1.149088] sensor_register_slave:cm3218,id=54
[ 1.149102] sensor_register_slave:ls_stk3410,id=62
[ 1.149117] sensor_register_slave:ps_stk3410,id=67
[ 1.150189] i2c /dev entries driver
[ 1.151763] fan53555-regulator 0-0040: FAN53555 Option Rev Detected!
[ 1.151908] fan53555-reg: supplied by vcc5v0_sys
[ 1.154178] fan53555-regulator 0-0041: FAN53555 Option Rev Detected!
[ 1.154278] fan53555-reg: supplied by vcc5v0_sys
[ 1.156721] rk808 0-001b: Pmic Chip id: 0x0
[ 1.160350] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.160428] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.160571] DCDC_REG1: supplied by vcc3v3_sys
[ 1.161469] DCDC_REG2: supplied by vcc3v3_sys
[ 1.162160] DCDC_REG3: supplied by vcc3v3_sys
[ 1.162535] DCDC_REG4: supplied by vcc3v3_sys
[ 1.163112] LDO_REG1: supplied by vcc3v3_sys
[ 1.164378] LDO_REG2: supplied by vcc3v3_sys
[ 1.165480] LDO_REG3: supplied by vcc3v3_sys
[ 1.166594] LDO_REG4: supplied by vcc3v3_sys
[ 1.167758] LDO_REG5: supplied by vcc3v3_sys
[ 1.168844] LDO_REG6: supplied by vcc3v3_sys
[ 1.169960] LDO_REG7: supplied by vcc3v3_sys
[ 1.171111] LDO_REG8: supplied by vcc3v3_sys
[ 1.172218] SWITCH_REG1: supplied by vcc3v3_sys
[ 1.172627] SWITCH_REG2: supplied by vcc3v3_sys
[ 1.176574] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[ 1.177251] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80096de000
[ 1.178133] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80096e0000
[ 1.178298] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
[ 1.178345] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
[ 1.178360] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xferon device rockchip-pinctrl
[ 1.178372] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
[ 1.178844] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff80096e2000
[ 1.180411] fusb302 4-0022: Can't get property of role, set role to default DRP
[ 1.188830] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[ 1.188919] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80096e4000
[ 1.190175] IR NEC protocol handler initialized
[ 1.190240] IR RC5(x/sz) protocol handler initialized
[ 1.190288] IR RC6 protocol handler initialized
[ 1.190305] IR JVC protocol handler initialized
[ 1.190320] IR Sony protocol handler initialized
[ 1.190335] IR SANYO protocol handler initialized
[ 1.190351] IR Sharp protocol handler initialized
[ 1.190367] IR MCE Keyboard/mouse protocol handler initialized
[ 1.190382] IR XMP protocol handler initialized
[ 1.190692] usbcore: registered new interface driver uvcvideo
[ 1.190722] USB Video Class driver (1.1.1)
[ 1.190745] CamSys driver version: v0.41.0, CamSys head file version: v1.0.0
[ 1.196680] __power_supply_register: Expected proper parent device for 'test_ac'
[ 1.196897] __power_supply_register: Expected proper parent device for 'test_battery'
[ 1.197277] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[ 1.197416] __power_supply_register: Expected proper parent device for 'test_usb'
[ 1.200941] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[ 1.201932] device-mapper: uevent: version 1.0.3
[ 1.202425] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.202674] Bluetooth: HCI UART driver ver 2.3
[ 1.202728] Bluetooth: HCI UART protocol H4 registered
[ 1.202739] Bluetooth: HCI UART protocol LL registered
[ 1.202754] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
[ 1.202798] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2
[ 1.202807] rtk_btusb: Register usb char device interface for BT driver
[ 1.203113] usbcore: registered new interface driver rtk_btusb
[ 1.203772] cpu cpu0: cpu_leakage=21
[ 1.203873] cpu cpu0: cpu_leakage=21
[ 1.216733] cpu cpu0: temp=37500, pvtm=144168 (144628 + -460)
[ 1.217640] cpu cpu4: cpu_leakage=39
[ 1.217757] cpu cpu4: cpu_leakage=39
[ 1.230207] cpu cpu4: temp=40000, pvtm=154416 (154487 + -71)
[ 1.236329] sdhci: Secure Digital Host Controller Interface driver
[ 1.236383] sdhci: Copyright(c) Pierre Ossman
[ 1.236400] Synopsys Designware Multimedia Card Interface Driver
[ 1.237634] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.237792] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 1.237853] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 1.237916] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 1.237947] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 1.238022] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 1.238034] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 1.239128] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.239247] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 1.239298] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 1.239358] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[ 1.239382] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 1.239500] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[ 1.239885] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[ 1.240037] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[ 1.250884] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.265224] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 1.265733] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.267774] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 1.267825] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[ 1.294275] mmc1: SDHCI controller on fe330000.sdhci using ADMA
[ 1.296317] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.299129] usbcore: registered new interface driver usbhid
[ 1.299145] usbhid: USB HID core driver
[ 1.299301] inv_mpu_iio: inv_mpu_init:746
[ 1.300022] ashmem: initialized
[ 1.301645] rockchip-dmc dmc: unable to get devfreq-event device : dfi
[ 1.304206] ff100000.saradc supply vref not found, using dummy regulator
[ 1.309051] rknandbase v1.2 2018-05-08
[ 1.309609] usbcore: registered new interface driver snd-usb-audio
[ 1.311059] rt5640 1-001c: rt5640 have no aux_det_adc_value defined
[ 1.325318] u32 classifier
[ 1.325337] Actions configured
[ 1.325385] Netfilter messages via NETLINK v0.30.
[ 1.325446] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.325881] ctnetlink v0.93: registering with nfnetlink.
[ 1.326680] xt_time: kernel timezone is -0000
[ 1.327675] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.327904] arp_tables: (C) 2002 David S. Miller
[ 1.328282] Initializing XFRM netlink socket
[ 1.328747] NET: Registered protocol family 10
[ 1.329654] mip6: Mobile IPv6
[ 1.329698] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.330672] sit: IPv6 over IPv4 tunneling driver
[ 1.331462] NET: Registered protocol family 17
[ 1.331521] NET: Registered protocol family 15
[ 1.331590] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.332411] Bridge firewalling registered
[ 1.332442] Ebtables v2.0 registered
[ 1.332882] Bluetooth: RFCOMM TTY layer initialized
[ 1.332924] Bluetooth: RFCOMM socket layer initialized
[ 1.332970] Bluetooth: RFCOMM ver 1.11
[ 1.333011] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.333038] Bluetooth: BNEP filters: protocol multicast
[ 1.333060] Bluetooth: BNEP socket layer initialized
[ 1.333086] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.333107] Bluetooth: HIDP socket layer initialized
[ 1.333173] l2tp_core: L2TP core driver, V2.0
[ 1.333210] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.333235] : Enter rfkill_wlan_init
[ 1.333667] : Enter rfkill_wlan_probe
[ 1.333742] : wlan_platdata_parse_dt: wifi_chip_type = ap6356s
[ 1.333763] : wlan_platdata_parse_dt: enable wifi power control.
[ 1.333778] : wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.333908] : wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[ 1.333922] : rfkill_wlan_probe: init gpio
[ 1.333938] : Exit rfkill_wlan_probe
[ 1.334028] : Enter rfkill_rk_init
[ 1.334659] : bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[ 1.334743] : bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[ 1.334808] : bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[ 1.334866] : bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[ 1.335010] mmc1: MAN_BKOPS_EN bit is not set
[ 1.335301] : Request irq for bt wakeup host
[ 1.335359] : BT_WAKE_HOST IRQ fired
[ 1.335393] : ** disable irq
[ 1.335622] : bt_default device registered.
[ 1.335956] sensor_register_slave:mpu6500_gyro,id=49
[ 1.335991] sensor_register_slave:mpu6880_gyro,id=50
[ 1.338308] Registered cp15_barrier emulation handler
[ 1.338446] Registered setend emulation handler
[ 1.339787] registered taskstats version 1
[ 1.340937] rockchip ion idev is NULL
[ 1.340974] rga2 ff680000.rga: rga ion client create success!
[ 1.341359] rga: Driver loaded successfully ver:3.02
[ 1.342943] phy phy-ff770000.syscon:usb2-phy@e450.6: Failed to get VBUS supply regulator
[ 1.345902] rockchip-drm display-subsystem: defer getting devfreq
[ 1.346440] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 1.346919] rockchip-vop ff900000.vop: unable to request PWM
[ 1.346973] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[ 1.347060] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 1.347140] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[ 1.347392] rockchip-vop ff8f0000.vop: unable to request PWM
[ 1.347436] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[ 1.347938] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
[ 1.348394] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB
[ 1.348524] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 1.348591] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.348814] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.348947] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB
[ 1.349486] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB
[ 1.350192] uboot: 0x000400000 -- 0x000800000 (4 MB)
[ 1.350213] trust: 0x000800000 -- 0x000c00000 (4 MB)
[ 1.350225] misc: 0x000c00000 -- 0x001000000 (4 MB)
[ 1.350236] resource: 0x001000000 -- 0x002000000 (16 MB)
[ 1.350247] kernel: 0x002000000 -- 0x004000000 (32 MB)
[ 1.350258] boot: 0x004000000 -- 0x006000000 (32 MB)
[ 1.350268] recovery: 0x006000000 -- 0x00a000000 (64 MB)
[ 1.350279] backup: 0x00a000000 -- 0x011000000 (112 MB)
[ 1.350290] security: 0x011000000 -- 0x011400000 (4 MB)
[ 1.350302] cache: 0x011400000 -- 0x031400000 (512 MB)
[ 1.350313] system: 0x031400000 -- 0x0d1400000 (2560 MB)
[ 1.350337] metadata: 0x0d1400000 -- 0x0d2400000 (16 MB)
[ 1.350347] vendor: 0x0d2400000 -- 0x0f2400000 (512 MB)
[ 1.350358] oem: 0x0f2800000 -- 0x112800000 (512 MB)
[ 1.350369] frp: 0x112800000 -- 0x112880000 (0 MB)
[ 1.350379] userdata: 0x112880000 -- 0x3a3a00000 (10513 MB)
[ 1.350466]mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16
[ 1.351681] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
[ 1.352777] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
[ 1.353432] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops)
[ 1.353463] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.353478] No driver support for vblank timestamp query.
[ 1.354474] cdn-dp fec00000.dp: Not connected. Disabling cdn
[ 1.390857] usb 1-1: new high-speed USB device number 2 using ehci-platform
收←◆[ 1.433868] fusb302 4-0022: connection has disconnected
收←◆[ 1.516676] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201
[ 1.516749] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.516773] usb 1-1: Product: USB 2.0 Hub
[ 1.518159] hub 1-1:1.0: USB hub found
[ 1.518369] hub 1-1:1.0: 7 ports detected
收←◆[ 1.782428] fusb302 4-0022: connection has disconnected
收←◆[ 1.851095] dwhdmi-rockchip ff940000.hdmi: failed to get edid
[ 1.866262] vendor storage:20160801 ret = 0
收←◆[ 2.122202] fusb302 4-0022: connection has disconnected
收←◆[ 2.465758] fusb302 4-0022: connection has disconnected
收←◆[ 2.500977] dwhdmi-rockchip ff940000.hdmi: failed to get edid
[ 2.512679] rockchip-drm display-subsystem: fb0:frame buffer device
[ 2.533226] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[ 2.533910] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 3
[ 2.534643] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 2.534892] xhci-hcd xhci-hcd.11.auto: irq 235, io mem 0xfe800000
[ 2.535396] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.535539] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.535766] usb usb3: Product: xHCI Host Controller
[ 2.535994] usb usb3: Manufacturer: Linux 4.4.126 xhci-hcd
[ 2.536223] usb usb3: SerialNumber: xhci-hcd.11.auto
[ 2.537873] hub 3-0:1.0: USB hub found
[ 2.538114] hub 3-0:1.0: 1 port detected
[ 2.539024] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[ 2.539502] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 4
[ 2.539725] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.540114] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.540336] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.540562] usb usb4: Product: xHCI Host Controller
[ 2.540846] usb usb4: Manufacturer: Linux 4.4.126 xhci-hcd
[ 2.541073] usb usb4: SerialNumber: xhci-hcd.11.auto
[ 2.542669] hub 4-0:1.0: USB hub found
[ 2.542930] hub 4-0:1.0: 1 port detected
[ 2.546749] xhci-hcd xhci-hcd.11.auto: remove, state 1
[ 2.546900] usb usb4: USB disconnect, device number 1
[ 2.571676] xhci-hcd xhci-hcd.11.auto: Host not halted after 16000 microseconds.
[ 2.571724] xhci-hcd xhci-hcd.11.auto: Host controller not halted, aborting reset.
[ 2.572025] xhci-hcd xhci-hcd.11.auto: USB bus 4 deregistered
[ 2.572865] xhci-hcd xhci-hcd.11.auto: remove, state 1
[ 2.573099] usb usb3: USB disconnect, device number 1
[ 2.573851] xhci-hcd xhci-hcd.11.auto: USB bus 3 deregistered
[ 2.579083] xhci-hcd xhci-hcd.12.auto: xHCI Host Controller
[ 2.579401] xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 3
[ 2.579902] xhci-hcd xhci-hcd.12.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 2.580146] xhci-hcd xhci-hcd.12.auto: irq 236, io mem 0xfe900000
[ 2.580470] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.580550] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.580799] usb usb3: Product: xHCI Host Controller
[ 2.581022] usb usb3: Manufacturer: Linux 4.4.126 xhci-hcd
[ 2.581243] usb usb3: SerialNumber: xhci-hcd.12.auto
[ 2.582032] hub 3-0:1.0: USB hub found
[ 2.582276] hub 3-0:1.0: 1 port detected
[ 2.582810] xhci-hcd xhci-hcd.12.auto: xHCI Host Controller
[ 2.583119] xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 4
[ 2.583236] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.583491] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.583625] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.583848] usb usb4: Product: xHCI Host Controller
[ 2.584072] usb usb4: Manufacturer: Linux 4.4.126 xhci-hcd
[ 2.584296] usb usb4: SerialNumber: xhci-hcd.12.auto
[ 2.585005] hub 4-0:1.0: USB hub found
[ 2.585299] hub 4-0:1.0: 1 port detected
[ 2.589978] ehci-platform fe380000.usb: EHCI Host Controller
[ 2.590192] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[ 2.590420] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[ 2.597523] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 2.597702] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.597731] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.597741] usb usb5: Product: EHCI Host Controller
[ 2.597751] usb usb5: Manufacturer: Linux 4.4.126 ehci_hcd
[ 2.597760] usb usb5: SerialNumber: fe380000.usb
[ 2.598251] hub 5-0:1.0: USB hub found
[ 2.598302] hub 5-0:1.0: 1 port detected
[ 2.599146] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 2.599368] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[ 2.599567] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
收←◆[ 2.655320] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.655412] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.655439] usb usb6: Product: Generic Platform OHCI controller
[ 2.655465] usb usb6: Manufacturer: Linux 4.4.126 ohci_hcd
[ 2.655555] usb usb6: SerialNumber: fe3a0000.usb
[ 2.656782] hub 6-0:1.0: USB hub found
[ 2.656908] hub 6-0:1.0: 1 port detected
[ 2.659740] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 2.659976] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 2.660055] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 2.660122] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 2.660218] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 2.660310] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 2.660334] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 2.661126] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[ 2.674340] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.687714] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[ 2.693650] rockchip-dmc dmc: could not find power_model node
收←◆[ 2.717136] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
[ 2.725674] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.726471] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card0/input1
[ 2.727837] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.729740] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.731431] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
[ 2.733131] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.736318] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already present
[ 2.736448] hdmi-audio-codec hdmi-audio-codec.10.auto: ASoC: Failed to add ELD: -16
[ 2.738191] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mapping ok
[ 2.738424] hdmi-audio-codec hdmi-audio-codec.10.auto: ASoC: Failed to create Playback debugfs file
[ 2.743252] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:04 UTC (1358499004)
[ 2.744858] It doesn't contain Rogue gpu
收←◆[ 2.781656] ret 1024
[ 2.782748] I : : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; : 415; : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-063a325', rk_ko_ver is '5', built at '19:13:34', on 'Aug2 2018'.
[ 2.783996] Mali: Mali device driver loaded
[ 2.785683] input: rk29-keypad as /devices/platform/rockchip-key/input/input2
[ 2.787800] ALSA device list:
[ 2.787944] #0: rockchip,rt5640-codec
[ 2.787963] #1: ROCKCHIP,SPDIF
[ 2.787980] #2: rk-hdmi-dp-sound
[ 2.789175] Freeing unused kernel memory: 832K
[ 2.794196] mmc_host mmc2: Bus speed (slot 0) = 200000000Hz (slot req 208000000Hz, actual 200000000HZ div = 0)
[ 2.801002] init: init first stage started!
[ 2.801882] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.810720] fusb302 4-0022: connection has disconnected
收←◆[ 2.887641] usb 3-1: new full-speed USB device number 2 using xhci-hcd
[ 2.899480] fec: <1> error: get_squashfs_size: failed to parse superblock: Invalid argument
[ 2.899684] init: Failed to get verity metadata '/dev/block/by-name/system': No such file or directory
[ 2.901054] init: Failed to setup verity for '/system': No such file or directory
[ 2.901286] init: Failed to mount required partitions early ...
[ 2.901441] init: panic: rebooting to bootloader
[ 2.901678] init: Reboot start, reason: reboot, rebootTarget: bootloader
[ 2.901942] init: android::WriteStringToFile open failed: No such file or directory
[ 2.902229] init: Shutdown timeout: 6000 ms
[ 2.902406] init: terminating init services
[ 2.902598] init: waitid failed: No child processes
[ 2.902831] init: Terminating running services took 1ms with remaining services:0
[ 2.903048] init: waitid failed: No child processes
[ 2.903270] init: vold not running, skipping vold shutdown
收←◆[ 3.004778] init: powerctl_shutdown_time_ms:102:0
[ 3.004963] init: Reboot ending, jumping to kernel
[ 3.005096] cpu4 limit freq=816000 min=816000 max=816000
[ 3.006969] cpu0 limit freq=816000 min=816000 max=816000
[ 3.009170] usb 3-1: New USB device found, idVendor=222a, idProduct=0001
[ 3.009206] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.009218] usb 3-1: Product: ILITEK-TP
[ 3.009230] usb 3-1: Manufacturer: ILITEK
[ 3.028635] input: ILITEK ILITEK-TP as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.12.auto/usb3/3-1/3-1:1.0/0003:222A:0001.0001/input/input3
收←◆[ 3.081615] hid-multitouch 0003:222A:0001.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse on usb-xhci-hcd.12.auto-1/input0
[ 3.096802] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 247
[ 3.101388] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[ 3.101907] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[ 3.117663] rk-vcodec ff660000.rkvdec: vcodec shutdown
[ 3.118130] rk-vcodec ff650000.vpu_service: vcodec shutdown
[ 3.118965] rk808->stby_gpio(56)=low
[ 3.119326] rk808->hold_gpio(45)=low
收←◆[ 3.153887] fusb302 4-0022: connection has disconnected
[ 3.159645] random: nonblocking pool is initialized
收←◆[ 3.320215] reboot: Restarting system with command 'bootloader'
收←◆DDR Version 1.12 20180518
In
soft reset
SRX
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg = 0x32817281, stride = 0x9
OUT
收←◆Boot1: 2018-04-08, version: 1.12
CPUId = 0x0
ChipType = 0x10, 273
收←◆SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
SdmmcInit=0 1
StorageInit ok = 68322
LoadTrustBL
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xa8e1c
RunBL31 0x10000
NOTICE:BL31: v1.3(debug):65aa5ce
NOTICE:BL31: Built : 10:47:37, Jun 19 2018
NOTICE:BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1151): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF TEE-CORE:init_primary_helper:337: Initializing (1.1.0-170-gc4654a6 #16 Wed May 30 08:54:30 UTC 2018 aarch64)
INF TEE-CORE:init_primary_helper:338: Release version: 1.2
INF TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2014.10-RK3399-06 (Jul 20 2018 - 09:42:54)
CPU: rk3399
cpu version = 0
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 800000000HZ
aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
cpll = 800000000HZ
dpll = 800000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM:Found dram banks: 1
Adding bank:0000000000200000(000000007fe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01e00000
128 MiB
收←◆SdmmcInit = 0 20
收←◆storage init OK!
Using default environment
GetParam
Load FDT from resource image.
power key: bank-0 pin-5
can't find dts node for fixed
usb bc: can find node by path: /dwc-control-usb/usb_bc
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=66
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 800000000HZ
aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
cpll = 800000000HZ
dpll = 800000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Can't find dts node for fuel guage cw201x
can't find dts node for ec-battery
Can't find dts node for charger bq25700
invalide header tag
ca head not found
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2018-07-20#1.12
empty serial no.
reboot rockusb.
1，你电源是怎么供电的？拍实物接线图看看
2，你烧录的过程中，有什么异常吗?可否再刷一次，把过程截几张图看看，好分析是什么问题
因为我们都升级这样固件的，都是OK的
樓主大大後來有解決開不了機的問題嗎
小弟我也遇到開不了機的問題 请教下楼主，这个报错解决了吗 fusb302 4-0022: connection has disconnected， 换条typc线 换条typc线 换条typc线 换条typc线
页:
[1]